| |
P/N
|
Product Description |
|
 |
NET-CAN 110 |
1 port TCP/IP
to CAN Bus Adapter
|
|
|
|
SER-CAN
|
1 port Serial to CAN Bus
Adapter
 |
Connects a PC via serial port to CAN Bus
|
|
|
Supports CAN 2.0A and CAN 2.0B
|
|
|
CAN High Speed up to 1MBit/s
|
|
|
Remote Frame support
|
|
|
Listen only mode
|
|
|
Library (DLL) for standard access
|
|
|
ASCII conversion protocol via serial port
|
|
|
Support in Windows and Linux
|
|
|
Metal case
|
|
|
 |
USB-CAN
|
1 port USB to
CAN Bus Adapter
|
|
Connects a PC via USB to CAN Bus
|
|
|
Supports CAN 2.0A and CAN 2.0B
|
|
|
CAN High Speed up to 1MBit/s
|
|
|
USB2.0 Full Speed |
|
|
Powered by USB
|
|
|
Driver emulates serial port for easy access |
|
|
Remote Frame support
|
|
|
Listen only mode
|
|
|
Library (DLL) for standard access
|
|
|
ASCII conversion protocol via serial port
|
|
|
Support in Windows 2000/XP/2003/Vista,
|
|
|
Support in Linux kernel 2.4.32+
|
|
|
Metal case |
|
|
 |
USB-CANmodul1 |
Low cost CAN USB Adapter
|
|
High-speed CAN interface according to ISO 11898-2 |
|
|
Time-stamped CAN messages |
|
|
Supports 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active)
identifiers |
|
|
Works with USB2.0 hubs |
|
|
Up to 64 USB-CANmodul devices can be connected via
standard USB hubs for simultaneous use on a single PC
|
|
|
Configuration tool for managing multiple USB-CANmodul
devices |
|
|
Device drivers & Software available for Windows® 7/Vista/XP (32/64
bit), Windows® 2000, Linux, WinCE 5.0, WinCE 6.0
|
|
|
 |
USB-CANmodul2 |
Two ports CAN USB Adapter
|
|
2 High-speed CAN interfaces (standard version) |
|
|
Low-speed and single-wire CAN interfaces optionally
available |
|
|
Time-stamped CAN messages |
|
|
Works with USB2.0 hubs
|
|
|
Up to 128 CAN-channels can be used simultaneously on the
same PC |
|
|
Device drivers & Software available for Windows® 7/Vista/XP (32/64
bit), Windows® 2000, WinCE 5.0, WinCE 6.0
|
|
|
 |
USB-CANmodul2 - IP65 |
Two ports CAN USB Adapter
|
|
IP65 metal housing wall-mountable
|
|
|
2 high-speed CAN interfaces
|
|
|
Time-stamped CAN messages |
|
|
Works with USB2.0 hubs
|
|
|
Up to 128 CAN-channels can be used simultaneously on the
same PC |
|
|
Device drivers available for Windows® 7/Vista/XP (32/64
bit), Windows® 2000, WinCE 5.0, WinCE 6.0 |
|
|
 |
USB-CANmodul8 |
USB CAN Gateway with 8 CAN-channel support
|
|
8 high-speed CAN interfaces according to ISO 11898-2,
galvanic isolated |
|
|
Time-stamped CAN messages
|
|
|
Supports 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active)
identifiers |
|
|
Simultaneous use of up to 8 USB-CANmodul8 devices on a
single PC, providing access to up to 64 CAN-channels |
|
|
Device drivers & software available for Windows® 7/Vista/XP (32/64
bit), Windows® 2000, WinCE 5.0, WinCE 6.0 |
|
|
 |
CAN-Ethernet |
A high-precise CAN-bus Ethernet Interface
|
|
Plug & Play – the device is ready for operation
immediately |
|
|
Configurable transmission-filters for CAN messages
|
|
|
Variable trigger threshold for transferring CAN messages
over Ethernet |
|
|
Various configuration examples for different application
scenarios |
|
|
CANAPI2 interface for use with off-shelf CAN applications
|
|
|
Configuration and diagnosis via Telnet and RS232
|
|
|
Support of multipoint connections
|
|
|
Optional with two separate CAN interfaces
|
|
|
 |
CAN-Ethernet Gateway V2 |
Multi-level CAN
networking made easy
|
|
PC driver with programmer API (binary or ASCII mode)
|
|
|
Simultaneously supports multiple connections, mixed
client/server mode possible
|
|
|
Configurable filters for transmission of CAN messages,
sample configuration files on CD
|
|
|
Configurable threshold for triggering the transmission,
keep-alive monitoring and automatic reconnection
|
|
|
Active transmission of CAN error messages with
configurable CAN identifier
|
|
|
Fast and reliable transfer of CAN messages including time
stamps for each message |
|
|
Remote shell access for configuration via telnet (over
Ethernet or USB, password protected)
|
|
|
 |
CANopen IO-C12
|
I/O Extension CAN BUS Slave
Device
|
|
27 digital inputs 24VDC, galvanic isolated
|
|
|
16 digital outputs 24VDC/0,5A, galvanic isolated,
short-circuit proof |
|
|
4 Relay outputs 250VAC/3A, 3 NO and 1 changer
|
|
|
4 analog inputs 0..10VDC, 10-bit resolution
|
|
|
2 analog outputs 0..10VDC, max. 30mA, 10-bit
resolution, short-circuit proof
|
|
|
2 PWM outputs 24VDC/0,5A
|
|
|
IO connectors: removable spring type terminal
connectors |
|
|
LED for indication of IO-state, Power LED, device
state, Error-LED |
|
|
 |
CANopen IO-X1
|
16DI/8DO CAN BUS Slave
Device
|
|
Digital outputs: 8 channels, 24VDC /
500mA high side switches with short circuit protection
and monitoring, overheat protection |
|
|
Digital inputs: 16 channels, 24VDC
galvanic isolated 4 channels share same ground |
|
|
Galvanic decoupled CAN-bus driver
supports up to 110 CAN-nodes on one bus |
|
|
Jumper for CAN-bus termination 120Ω |
|
|
Hex-encoding switches for setting node–ID
and baud rate |
|
|
CAN-bus baud rate: 10kBit/s to 1Mbit/s |
|
|
|
|
CANopen IO–X2
|
24DI CAN BUS Slave
Device
|
|
Digital inputs: 24 channels 24VDC
galvanic isolated 4 channels share one common ground |
|
|
Galvanic decoupled CAN-bus driver
supports up to 110 CAN-nodes on one bus |
|
|
Jumper for CAN-bus termination 120Ω |
|
|
Hex-encoding switches for setting node–ID
and baud rate |
|
|
CAN-bus baud rate: 10kBit/s to 1Mbit/s |
|
|
|
|
CANopen IO–X3
|
24DO CAN BUS Slave
Device
|
|
Digital
outputs: 24 channels 24VDC / 500mA high side switches
short circuit protection (max. 4A) and monitoring
overheat protection |
|
|
Galvanic decoupled CAN-bus driver
supports up to 110 CAN-nodes on one bus |
|
|
Jumper for CAN-bus termination 120Ω |
|
|
Hex-encoding switches for setting node–ID
and baud rate |
|
|
CAN-bus baud rate: 10kBit/s to 1Mbit/s |
|
|
|
|
CANopen IO–X4
|
8AI CAN BUS Slave
Device
|
|
8 channels analog input each
configurable as ±10V; 0..10V or (0)4..20mA input type
Resolution 12bit (optional 14bit) Accuracy < 0,5%
(12-bit) |
|
|
Galvanic decoupled CAN-bus driver
supports up to 110 CAN-nodes on one bus |
|
|
Jumper for CAN-bus termination 120Ω |
|
|
Hex-encoding switches for setting node–ID
and baud rate |
|
|
CAN-bus baud rate: 10kBit/s to 1Mbit/s |
|
|
|
|
CANopen IO–X5
|
8
Temp In RTD CAN BUS Slave
Device
|
|
8 RTD input channels each configurable
as PT100 or PT1000 input type 3-wire connection points
Resolution 12bit (optional 14bit) Accuracy < 0.5% at
12bit resolution Automatic self-calibration of ADC |
|
|
Galvanic decoupled CAN-bus driver
supports up to 110 CAN-nodes on one bus |
|
|
Jumper for CAN-bus termination 120Ω |
|
|
Hex-encoding switches for setting node–ID
and baud rate |
|
|
CAN-bus baud rate: 10kBit/s to 1Mbit/s |
|
|
|
|
CANopen IO–X6
|
8AO CAN BUS Slave
Device
|
|
8 channels
analog output each configurable as 0..10V or 4..20mA
output Resolution 10bit (optional 12-bit) Short-circuit
monitoring Open-load monitoring (for current mode) |
|
|
Galvanic decoupled CAN-bus driver
supports up to 110 CAN-nodes on one bus |
|
|
Jumper for CAN-bus termination 120Ω |
|
|
Hex-encoding switches for setting node–ID
and baud rate |
|
|
CAN-bus baud rate: 10kBit/s to 1Mbit/s |
|
|
|
|
CANopen IO–X7
|
8 Temp In Thermocouple CAN BUS Slave
Device
|
|
8 inputs
Thermocouple sensors Each channel separately
configurable for type E, J, K, L, R, S, T Accuracy <0,5%
at 12-bit resolution Each channel state is indicated via
LEDs separately Variable temperature thresholds
including LED indicators |
|
|
Galvanic decoupled CAN-bus driver
supports up to 110 CAN-nodes on one bus |
|
|
Jumper for CAN-bus termination 120Ω |
|
|
Hex-encoding switches for setting node–ID
and baud rate |
|
|
CAN-bus baud rate: 10kBit/s to 1Mbit/s |
|
|
Back to Top
|
