|
| |
1 port RS-232/RS-422/RS-485 secure serial device server
|
 |
 |
|
NetCom 113 PRO is an
industrial-strength network-based serial device server for connecting one
RS232/422/485 device like CNC, PLC, weighting scale, scanner and other devices
directly to a network running TCP/IP.
NetCom 113 PRO provides completely secured communication for configuration and
to the attached serial device. In addition to allowing serial devices to get
networked, any host (PC Server or Workstation) without network access can also
access remote serial device via adding NetCom devices to the existing serial
port.
NetCom 113 PRO can be configured over Driver Panels, WEB Browser, serial Port,
Telnet, SNMP and serves as a transparent serial channel without platform and
distance limitation.
|
|
Features |
 |
Controls 1 RS232/422/485 device located virtually anywhere
via Ethernet or Internet
|
|
|
Secure encryption on Ethernet
|
|
|
LAN interface 10BaseT/100BaseTx Ethernet
|
|
|
Driver automatically finds NetCom devices in the network
|
|
|
Configuration over Driver Panels, serial Port, Telnet, WEB
Browser, SNMP
|
|
|
Automatic mode switching between Driver and Raw Mode
|
|
|
Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP
V1/2c/3, DNS |
|
|
Supports ART (Automatic Receive Transmit control)
|
|
|
RS232/422/485 interface selectable by Switches and Software
|
|
Back to Top |
|
Specifications |
Hardware
|
|
Processor: ARM 9 166
MHz |
|
|
I/O controller:
16C950 or compatible |
|
|
Memory: 16MB SDRAM, 2
MB Flash |
|
|
Connector type: RJ45
for Ethernet, DSUB 9 male for serial Port |
|
Interface
|
|
Ethernet interface:
Auto-detecting 10BaseT/100BaseTx |
|
|
Protocols: TCP/IP,
UDP, Telnet, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS |
|
|
Serial interface:
RS232/422/485 selected by software or DIP-switch |
|
|
No. of port: 1, Speed
up to 3.6 Mbps |
|
|
Available Modes:
RS232 full duplex;
RS422 full duplex;
RS485 4 wire, full duplex;
RS485 2 wire, half duplex, with echo;
RS485 2 wire, half duplex, without echo |
|
|
Signals:
RS232 TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND; RS422 Tx+/-, Rx+/-, GND;
RS485 2 wire Data+/-, GND;
RS485 4 wire Tx+/-, Rx+/-, GND;
RS485 Data control |
|
|
Signals: Controlled
by ART (Automatic Receive Transmit control) or RTS |
|
|
Performance
|
|
Speed:
RS232: up to 921.6 kbps,
RS422/485: up to 3.6Mbps |
|
|
Parity: None, even,
odd, space, mark |
|
|
Data bits: 5, 6, 7, 8 |
|
|
Stop bits: 1, 1.5, 2 |
|
|
IRQ: None |
|
|
I/O address: None |
|
|
Operating Modes
|
|
Driver mode: VScom
Driver for Windows NT 4.0, 2000, XP and 2003, Vista (Driver Mode
creates virtual Com port) |
|
|
TCP Raw Server: Raw
data transfer over TCP/IP. Accepts multiple incoming connections |
|
|
Raw data transfer
over TCP/IP. Accepts multiple incoming connections: Raw data
transfer over TCP/IP. Connects to multiple hosts or devices
waiting for incoming connections |
|
|
TCP Advanced
Settings: Special settings for user-defined modes |
|
|
UDP Mode: Raw data
transfer by UDP. The NetCom is client and server at the same
time. Timeout functionality, maximum packet size and a
configurable trigger string define the packets of incoming data
to send over UDP |
|
|
Null Modem Tunnel:
Connecting two NetCom used as virtual null modem cable |
|
|
IP Modem: The serial
port emulates a standard modem. Operates by AT-commands, and
dials to IP-Addresses instead of phone numbers. Windows
"INF"-Driver provided for installation |
|
|
Print Server: The
NetCom accepts print jobs, and spools them to the attached
serial printer. Operates as of RFC1197, similar to the line
printer daemon in Unix-systems |
|
|
Power
and Environment
|
|
Power requirements: 9
- 30V DC, 500mA @ 12V |
|
|
Power supply Adapter:
12V DC, 1A. Connected by Terminal block |
|
|
Dimension: 73 x 115 x
27 mm (W×L×H), 101 x 121 x 27 mm with DB9 connector & DIN rail
mounting kit |
|
|
Operating Temp.: 0°C
- 60 °C |
|
|
Storage Temp: -20°C -
85°C |
|
|
Case: SECC sheet
metal (1mm) |
|
|
Weight: 0.2kg |
|
|
Special Features
|
|
Installation:
Configuration utility automatically finds NetCom devices in the
network |
|
|
Operating mode:
Automatic mode switching between Driver and TCP RAW mode. With
TCP Advanced settings it is possible to configure the NetCom for
using it in multiple modes, so it decides automatically which
mode should be used |
|
|
Configuration:
Configuration over Driver Panels, NetCom Manager, WEB Browser,
serial console, Telnet, SNMP |
|
|
SNMP: special VScom
MIB included |
|
|
ART: Automatic
Receive Transmit control for RS485 |
|
|
DNS: Domain Name
Server support |
|
|
Serial interface:
Serial Interface configurable with DIP switch and by software |
|
|
Firewall: Special
precautions for Firewall environments |
|
|
Firmware: Firmware
update over WEB Browser, Telnet, ComPort |
|
|
LEDs: LEDs for Power,
serial Tx, Rx, Ethernet Link, Speed |
|
|
Security
|
|
Password access:
Every capabilities of configuration use the same password
including SNMP V3 |
|
|
Secure communication:
OpenVPN tunnel provides security on Ethernet. The
tunnel protects the configuration as well as all serial data. It
is also usable across the Internet. Strong encryption by AES up
to 256 bit keys |
|
|
Approvals
|
|
EMC: FCC Class A, CE
Class A |
|
|
Environment: RoHS |
|
|
Ordering Information
|
|
Product Name: NetCom
113 PRO |
|
|
Packing list: NetCom
113 PRO, Power supply adapter 12V 500mA, CD-ROM with Driver and
configuration software, Printed Quick Installation Guide |
|
|
Optional Accessories:
DK-35A DIN-Rail mounting kit |
|
|
Back to Top |
|
| Israel, IL, ישראל |
vs-com vscom |
שרת
מוגן
TCP/IP
עם יציאה של RS-232/422/485
בחיבור DB9 |
|
