|
| |
|
4 Ports
RS-232/RS-422/RS-485 DB9 to TCP/IP Serial Server
|
 |
 |
|
The NetCom
413 is an industrial-strength network-based serial device server for
connecting four RS-232/422/485 device like CNC, PLC, weighting scale,
scanner and other devices directly to the 10/100Mbps Ethernet network
running TCP/IP. In addition to allowing serial devices to get networked,
any host (PC Server or Workstation) without network access can also
access remote serial device via adding NetCom devices to the existing
serial port. NetCom 413 can be configured over Driver Panels, WEB
Browser, serial Port, Telnet, SNMP and serves as a transparent serial
channel without platform and distance limitation.
Applications: Industrial /
Factory / Laboratory automation, SCADA system, Automatic warehouse
control system, Building automation system, Wafer fabrication system,
Self-service banking system, Retail system, Other remote and distributed
serial devices control
|
|
Features |
 |
Can control 4 x RS-232/422/485 devices
located virtually anywhere (via Ethernet or Internet)
|
|
|
LAN interface10BaseT/100BaseTx Ethernet
|
|
|
Driver automatically finds NetCom devices in
the network
|
|
|
Configuration over Driver Panels, serial
Port, Telnet, WEB Browser, SNMP
|
|
|
Automatic mode switching between Driver and
Raw Mode
|
|
|
Support TCP/IP, UDP, Telnet, DHCP, ICMP,
HTTP, SNMP V1/2c/3, DNS
|
|
|
supports ART (Automatic Receive Transmit
control)
|
|
|
RS-232/422/485 interface selectable by
Switches
|
|
Back to Top |
|
Specifications |
|
Hardware
|
|
Processor: ARM 7 TDMI 50MHz |
|
|
I/O controller: 16C550C or compatible |
|
|
Memory: 8MB SDRAM, 1 MB Flash |
|
|
Connector type: RJ45 for LAN, DSUB 9
female for serial Port |
|
|
Interface
|
|
LAN interface: Auto-detecting
10BaseT/100BaseTx |
|
|
Protocols: TCP/IP, UDP, Telnet, DHCP,
ICMP, HTTP, SNMP V1/2c/3, DNS |
|
|
Serial interface: RS-232/422/485 switch
able |
|
|
No. of port: 4, Speed up to 460Kbps |
|
|
Available Modes: RS-232 full duplex,
RS-422 full duplex, RS-485 4 wire, full duplex, RS-485 2
wire, half duplex, with echo, RS-485 2 wire, half
duplex, without echo |
|
|
Signals: RS-232: TxD, RxD, RTS/CTS, DTR,
DSR, DCD, RI, GND; RS-422: Tx+/-, Rx+/-, GND; RS-485 2
wire Data+/-, GND; RS-485 4 wire Tx+/-, Rx+/-, GND |
|
|
RS-485 Data control: Controlled by ART
(Automatic Receive Transmit control) or RTS |
|
|
Performance
|
|
Speed: up to 460Kbps |
|
|
Parity: None, even, odd, space, mark |
|
|
Data bits: 5, 6, 7, 8 |
|
|
Stop bits: 1, 1.5, 2 |
|
|
IRQ: None |
|
|
I/O address: None |
|
|
Operating Modes:
|
|
Driver mode: Driver for Win XP, Vista,
Win2000, Creates virtual Com port |
|
|
TCP Raw Server: Raw data transfer over
TCP/IP. Waits for incoming connections. |
|
|
TCP Raw Client: Raw data transfer over
TCP/IP. Connects to a host or device waiting for
incoming connections |
|
|
TCP Advanced Settings: Special settings
for user-defined modes |
|
|
UDP Mode: Raw data transfer UDP. The
NetCom is client and server at the same time. With the
timeout functionality and a configurable trigger string
it can make defined UDP packets of incoming data. |
|
|
Null Modem Tunnel: Connecting two NetCom
used as virtual null modem cable |
|
|
Power and Environment
|
|
Power requirements: 9 - 30V DC, 400mA @
12V |
|
|
Power supply Adapter: 12V DC 1A |
|
|
Dimension: 167x99x29 mm (WxLxH),
189x102x29 mm with connectors |
|
|
Power and Environment
|
|
Installation: Configuration utility
automatically finds NetCom devices in the network |
|
|
Operating mode: Automatic mode switching
between Driver and TCP RAW mode. With TCP Advanced
settings it is possible to configure the NetCom for
using it in multiple modes, so it decides automatically
which mode should be used. |
|
|
Configuration: Configuration over Driver
Panels, NetCom Manager, WEB Browser, serial console,
Telnet, SNMP |
|
|
SNMP: special MIB included |
|
|
ART: Automatic Receive Transmit control
for RS-485 |
|
|
DNS: Domain Name Server support |
|
|
Serial interface: Serial Interface
configurable with external switch |
|
|
Firewall: Special precautions for
Firewall environments |
|
|
Firmware: Firmware update over WEB
Browser, Telnet, ComPort |
|
|
LED's: LED's for Power, Tx, Rx, LAN Link,
LAN Speed |
|
|
Security: Password access: Every capabilities of configuration
use the same password including SNMP V3 |
|
Ordering Information:
|
|
Product Name: NetCom 413 |
|
|
Packing list: NetCom 413, Power supply
adapter, CD-ROM with Driver and configuration software,
Printed Quick Installation Guide |
|
|
Back to Top |
|
|
