|
| |
|
Isolated Analog I/O and Digital I/O Card (with trigged data acquisition)
|
 |
 |
|
This Digital I/O PCI card are use
typically for: Analog signal measurement for physical signal of temperature,
voltage, current, flow, light......etc.
Digital i/o control of switch input, relay control, trigger
output,
Counter/Timer for event counting, periodic interrupt source,
PWM generator (can work as D/A with external low pass
filter), counter/timer with trigger out, duration counter
|
|
Features |
 |
Isolated 8 channel 12bit analog inputs |
|
|
Software selectable input range : -10V~ +10V, -5V~ +5V , 0~10V,
0~5V |
|
|
Isolated 16 channel 16bit analog output |
|
|
8 isolated digital input |
|
|
IN0, IN1 as trigger/counter in, OUT0,OUT1 as trigger out of
timer/counter function |
|
|
Two 32bit multifunction counters with 4/33 MHz multi-clock input |
|
|
Multi-function : programmable one-shot ; square wave generator ;
event counter ; PWM generator |
|
|
Auto data acquisition mode : buffer up to 1024, 3 trigger mode :
analog ;digital ;software, Start event trigger out and complete
trigger out available, Sampling rate : 110K ,10K , 1K , 100HZ
|
|
Back to Top |
|
Specifications |
|
Analog Input
|
|
Input channel : isolated 8 channel single
end |
|
|
Auto data acquisition : 110K, 10K,1K,100Hz sample rate
|
|
|
Resolution : 12bit
|
|
|
Trigger mode : digital, analog, software trigger
|
|
|
Input range : -10V~ +10V, -5V~ +5V ,
0~10V, 0~5V |
|
|
Trigger out : event start or complete
|
|
|
Range selection : software selectable |
|
|
Trigger out pulse
width : 1 ~ 16777215 us
|
|
|
Conversion speed : 13us per channel |
|
|
Trigger out
polarity : user programmable
|
|
|
Analog output
|
|
Output channels : isolated 8/16 channel
|
|
|
Output range : -10V~ +10V |
|
|
Resolution : 16bit |
|
|
Auto scan update rate : 2.1KHz |
|
|
Digital I/O
|
|
I/O channels : isolated 8DI, 8DO
|
|
|
Output range : open collector 0~45Vdc
(without wiring board)
|
|
|
Sink current : 500mA(peak) per output bit
(without wiring board)
|
|
|
Switch speed : 20KHz (without wiring
board or MOS type output) |
|
|
Output rating : using wiring board
ADP-9201DIN series - 3A @250Vac,30Vdc (Relay), 1A @24Vdc
(P-MOS), 2A @240Vac(SSR)
|
|
|
Timer/Counter
|
|
Channels : 2 |
|
|
Specific input : trigger in/counter in via
digital I/O port0 |
|
|
Data length : 32 bit |
|
|
Specific output : trigger out/counter out
via digital I/O port 1 |
|
|
Time base : 4/33MHz |
|
|
Multi-function : programmable
one-shot ; square wave generator ; event counter ; PWM
generator |
|
|
PCI
data width : 32 Bits |
|
Card ID : 0-15 selectable |
|
Security password : Security password : 5 words, user configurable
|
|
Interrupt : software disable/enable
|
|
Dimension :175(W)*120(H) mm, 6.89(W)*4.72(H) in
|
|
DIN
rail mounted wiring board
|
|
JS51026 for AI0~AI7 and
DA0~DA7 -
Connection
cable :
D-type 37P
cable to connect main and wiring board, Dimension :
86(W)*113(L)*52(H) mm,
3.39(W)*4.45(L)*2.05(H) in |
|
|
JS51050 For DA8~DA15 -
Connection
cable :
D-type 25P cable to connect main and wiring board,
Dimension: 86(W)*79(L)*52(H) mm, 3.39(W)*3.11(L)*2.05(H)
in |
|
|
JD50053
For JM2 digital I/O
-
Connection cable
:
20P flat cable to connect main and wiring board,
Dimension : 86(W)*79(L)*52(H) mm, 3.39(W)*3.11(L)*2.05(H)
in
|
|
|
ADP-9201DIN For JM2
digital I/O
- External Supply : DC 24V ± 4V,
Input : 8 with LED indicator; Output : ADP-9201DIN(R)
: 8 relays (3A @250Vac, 3A @30Vdc) with LED indicator,
ADP-9201DIN(S) : 8 SSR (2A @240Vac) with LED indicator,
ADP-9201DIN(P) : 8 P-MOS (Source 1A @24Vdc) with LED Indicator |
|
|
Connector: One 20-pin male flat-cable
connector |
|
|
Operation Temperature: 0 to +70 degree C |
|
|
Operation Humidity: RH5~95%,
non-condensing |
|
|
Dimension : ADP-9201DIN(R) / (P) : 86(W)
*103(L)*45(H) mm, 3.39(W)*3.11(L)*2.05(H) in, ADP-9201DIN(S) :
86(W) *103(L)*50(H) mm, 3.39(W)*4.06(L)*1.97(H) in
|
|
|
Driver , DLL ,Demo and Example Program for Win98/2K/XP |
|
Back to Top |
|
Ordering
Information |
|
AIO-3323 |
Isolated Analog I/O Card, 12bit AI x8 with triggered data
acquisition, 16 bit AO x16 and 16 isolated digital I/O and 2
32bit multi function timer/counter (include bracket kit for
digital I/O and AO )
|
Ordering Information |
|
JS51026 |
DIN rail mounted dummy wiring board (D type 37p male to
terminals ) |
Ordering Information |
|
JS51050 |
DIN rail mounted dummy wiring board (For
JM1)
|
Ordering Information |
|
JD50053 |
DIN rail mounted dummy wiring board (For JM2)
|
Ordering Information |
|
ADP-9201DIN(R) |
DIN rail mounted wiring board with 16 I/O LED indicators and
relay output for 8 DI, 8DO.(For JM2)
|
Ordering Information |
|
ADP-9201DIN(P) |
DIN rail mounted wiring board with 16 I/O LED
indicators and PMOS output for 8 DI, 8DO.(For JM2)
|
Ordering Information |
|
ADP-9201DIN(S) |
DIN rail mounted wiring board with 16 I/O LED
indicators and SSR output for 8 DI, 8DO. (For JM2)
|
Ordering Information |
|
M270337X0 |
D type 37p male-female cable 1.5M |
Ordering Information |
|
M270337X0S |
D type 37p male-female cable
1.5M,shielding |
Ordering Information |
|
M270337X2 |
D type 37p male-female cable 3.0M |
Ordering Information |
|
M270337X2S |
D type 37p male-female cable
3.0M,shielding |
Ordering Information |
|
M270325X4 |
D type 25p male-female cable 1.5M
|
Ordering Information |
|
M270325X4S |
D
type 25p male-female cable 1.5M,shielding
|
Ordering Information |
|
M270325X0 |
D type 25p male-female cable 3.0M
|
Ordering Information |
|
M270325X0S |
D
type 25p male-female cable 3.0M,shielding
|
Ordering Information |
|
M23207 |
20 pin flat cable 1.5M |
Ordering Information |
|
M23209 |
20 pin flat cable 3.0M |
Ordering Information |
|
SM23404 |
Extension kit for JM1 (bracket for 25p D-type connector , 26p
flat cable)
|
Ordering Information |
|
Back to Top |
|
|
