USB 2.0, USB 1.1, or eSATA
	Power from USB or optional AC/DC power adapter
	Read and write to PCMCIA hard drive, ATA Flash.*
	Read and write to CF-I, CF-II, Smart Memory™, Memory Stick™, Micro Drive™, Multimedia Card™, Secure Digital Card™ and XD Card™ using optional Flash adapter.
	Complete Plug and Play (1)
	USB Bootable from PCMCIA hard drive (depending on system BIOS support)
	Serial ATA Bootable from PCMCIA hard drive
	Up to 480 Mbits/sec (60 MB/sec) data transfer* for USB 2.0, 10 times the speed of USB 1.1
	Up to 1,500 Mbits/sec (150 MB/sec) data transfer for Serial ATA
	USB version works under Windows 98SE, Me, 2000, XP, Linux kernel 2.4 and higher
	eSATA version works under DOS, Windows 95, NT4.0, 98SE, Me, 2000, XP and Linux Kernel 2.4 and higher.
	RoHS Compliant (except for SATA)

note: The Panasonic P2 card is a 32-bit Cardbus device and therefore is not supported with the Pocket UDD. The Desktop Card Drive, PCI Cardbus/PCMCIA Controller, and ExpressCard Cardbus Adapter all support the Panasonic P2 Card.

(1) Serial ATA hot swap feature works only with controllers basing on Silicon Image chip set from Addonics inhouse testing. Other controllers that are not Silicon Image based may not support hot swap. You may consider adding one of the Addonics Serial ATA host controllers to your systems to ensure the hot swap capability. New controllers from Intel and other suppliers may finally support this feature. Please verify with your controller manufacturer if you need to have hot swap in your application. Hot swap is supported in Windows 2000 and XP only. On other OS, drive can be removed without crashing system. But replacing with a different drive can result in crashing the OS.