|
| |
|
EX-9486C-W
Serial (RS-232/422/485) to Wi-Fi Converter
|
 |
 |
|
|
The EX-9486C-W converter is a smart Wi-Fi LAN
extension snap-in that transfer data to RS232/RS-422 or
RS-485 serial port. The EX-9486C-W gives you the ability to
easily connect both common and special serial devices.
The RS-232 connection supports full-duplex communication and
handshaking signals (for example, RTS, CTS). The RS-485
control is completely transparent for the user allowing the
user to operate half-duplex COM operation without any
modification.
The EX-9486C-W uses external 12Vdc power supply, a network
adapter (optional) can optionally be supplied |
|
Features |
 |
Standard Compliance: IEE
802.11b/g
|
|
|
10/100 Mbps, RJ45, Built-in
Protection1.5 KV magnetic isolation |
|
|
1 * RS-232/422/485 port, male
DB9, S/W selectable
|
|
|
RS-232 Signals: TxD, RxD, GND
|
|
|
RS-422 Signal : Tx+ , Tx- ,
Rx+ , Rx – ( Surge Protect )
|
|
|
RS-485 Signal : Data+ , Data-
( Surge Protect )
|
|
|
Serial mode: Virtual Com /
TCP Server / TCP Client / UDP / Serial
Tunnel with advanced settings of TCP Alive |
|
|
Specifications |
WLAN
|
|
Atheros Chip Set
|
|
|
Standard Compliance: IEE 802.11b/g
|
|
|
Spread Spectrum Technology: DSSS, OFDM
|
|
|
Tx Power 11b: Maximum 20 dBm
|
|
|
Tx Power 11g: Maximum 18 dBm
|
|
|
Rx Sensitivity: -70 dBm @ 54 Mbps, -85
dBm @ 11Mbps
|
|
|
Transmission Rate: 54 Mbps (max.) with
auto fallback (54,48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2,
1 Mbps) |
|
|
Transmission distance: Up to 100
meters(@12 Mbps, in open areas)
|
|
|
Security: WEP 64-bit/128-bit data
encryption, AES, WPA2
|
|
|
Antenna Connector: Reverse SMA , 2 dBi
Antenna |
|
|
Network Mode: Infrastructure, Ad-Hoc LAN
( for configuration / Ethernet hub ) |
|
Ethernet
|
|
10/100 Mbps, RJ45
|
|
|
Protection: Built-in 1.5 KV magnetic
isolation |
|
Serial
|
|
No. of ports: 1 * RS-232/422/485 port,
male DB9, S/W selectable
|
|
|
RS-232 Signals: TxD, RxD, GND
|
|
|
RS-422 Signal : Tx+ , Tx- , Rx+ , Rx – (
Surge Protect )
|
|
|
RS-485 Signal : Data+ , Data- ( Surge
Protect ) |
|
|
Serial Line Protection: 15 KV ESD for all
signals |
|
|
Serial Communication Parameters
|
|
|
Parity: None, Even, Odd, Space, Mark
|
|
|
Data bits: 5, 6, 7, 8
|
|
|
Stop bits: 1, 1.5, 2
|
|
|
Flow control: RTS/CTS, XON/XOFF
|
|
|
Speed: 110 bps to 460.8+ Kbps |
|
| Power Supply: 12 VDC 1.5 A |
Environment information:
|
|
Operating Temperature: -10 to 70°C (32 to
131°F), 5 to 95% RH
|
|
|
Storage Temperature:-20 to 85°C (-4 to
185°F), 5 to 95%RH |
|
Regulatory Approvals
|
|
RoHS
|
|
|
EMC: FCC Class A, CE Class A |
|
Features of Software
|
|
Protocols: ICMP, IP, TCP, UDP, DHCP,
BootP, ARP / RARP, Telnet, RTelnet, DNS, SNMP MIB II,
HTTP, SMTP, SNTP
|
|
|
Serial mode: Virtual Com / TCP Server /
TCP Client / UDP / Serial Tunnel with advanced settings
of TCP Alive |
|
|
Check Timeout
|
|
|
Inactivity Timeout
|
|
|
Delimiter for Data Packing
|
|
|
Force TX Timeout for Data Packing
|
|
|
4 Hosts simultaneous connection: Virtual
Com / TCP server / TCP Client (only raw data)
|
|
|
Security: HTTPS, SSH v2
|
|
|
Event notification by email / SNMP trap
|
|
|
SNMP Trap
|
|
|
Cold/Warm Start
|
|
|
DSR, DCD Changed
|
|
|
IP Changed
|
|
|
Authentication Fail
|
|
|
SNMP Response
|
|
|
System MIB,
|
|
|
Interface MIB,
|
|
|
ICMP, IP, TCP MIB
|
|
|
UDP MIB
|
|
|
RS-232 MIB
|
|
|
Utilities: Windows NT/2000/XP/2003/VISTA
|
|
|
Device discovery
|
|
|
Auto IP report
|
|
|
Device setting (run-time change, no
rebooting)
|
|
|
Access control list
|
|
|
Group setting
|
|
|
Device monitoring
|
|
|
Serial port monitoring
|
|
|
Log info
|
|
|
Group Firmware update batch
|
|
|
Virtual COM/TTY Drivers (WDM mode,
configuration in windows device manager): Windows
NT/2000/XP/2003, VISTA |
|
Back to Top |
|
| Israel, ILישראל
|
|
ממיר
TCP/IP ליציאה סריאלית RS-232/422/485
אלחוטי |
|
