Papyrus Computer Technologies Ltd.                             

 

ThinQ RS-232/RS-422/RS-485 Serial Device Server
sds-200
Features
Specifications
Ordering Information
Inquiry this product

 
 

Quatech's high performance serial device servers feature a PowerPC® from Freescale™ (formerly Motorola® Semiconductor). This processor is part of a world-class architecture that offers the lowest latency available anywhere. In addition, the auto-sensing 10/100 Ethernet interface, and Quatech's proven high-speed, 921k-baud serial technology offer the best performance in the industry and ensure that your critical business applications won't be harmed by data throughput issues.

Installation Wizard - Easy to set up and install, Quatech Device Servers are up and running on your network in 10 minutes or less. A unique Installation Wizard automatically searches for and identifies any Quatech unit attached to the network, even searching remote subnets if needed. No client software is installed on your PC, just a small set of drivers that configures each serial port as a new COM port on the PC. This allows software applications to access the attached serial device as they are designed to, with no custom programming needed. Simply point your software application to the new, "virtual" COM port and you're all set!

Serial Tunneling - Do you have two serial devices that communicate directly with each other and you wish to replace the short serial cable using the distances possible with Ethernet technology? The two serial devices will then communicate as if connected by a short serial cable; the Ethernet portion will be invisible to the devices.

Auto TCP feature - For remote service and monitoring applications, try our AutoTCP feature. The serial port can be set up to act as a TCP Client, requesting a connection whenever the serial device is attached and powered on or, if you prefer, whenever serial data is ready for upload to the host computer. You can leave the connection on, or disconnect from the host after a specified period. But when a service request from a remote monitoring PC (with a specified IP address) arrives, the device server will act as a TCP server, allow access to the serial device to the monitoring PC, and go back to Client mode when the Server session is finished.

Industrial case - Quatech Device Servers are housed in a solid metal case suited for rugged industrial environments and a surge suppression option is available, as are DIN rail mounting for individual units, and rack mount kits for multi-port models.

Software Selctable MEI - The 400 Series models introduce a software-selectable, RS-232/422/485 multi-electrical interface (MEI) to the device server product line. These units can be configured for RS-232 or for RS-422 or RS-485 asynchronous communication in either full-duplex or half-duplex mode.
Features
bullet

Easy installation and configuration in under 10 minutes. PowerPC® microprocessor drives high throughput and industry's lowest latency

bullet

Network enable any RS-232, RS-422 or RS-485 serial devices for remote access and control

bullet

Remote Web browser-based configuration, administration and troubleshooting

bullet

Auto-detecting 10/100 Mbps Ethernet with built-in TCP/IP

bullet

Raw TCP and IntelliSock™ TCP socket services for custom applications

bullet

Configure as TCP Server, TCP Client, or as both using the exclusive AutoTCP feature

bullet

Serial Tunneling mode for connecting two serial devices over a network without a PC

bullet

Serial speeds to 921.6 kbps

bullet

1, 2, 4, or 8 independent RS-232 or software-selectable RS-232/422/485 serial ports

bullet

DB-9 and RJ-45 models available

bullet

Surge suppression package available

bullet

Virtual COM drivers for Windows Windows NT4/2000/XP, Vista & Linux, other OS support via socket modes

bullet

Full-duplex and half-duplex communication supported (RS-232/422/485)

bullet

PowerPC® microprocessor eliminates data bottlenecks and common latency issues (RS-232/422/485)

bullet

RoHS compliant

Back to Top
Specifications
LAN Interface: 10/100 BaseT (IEEE 802.3), auto-negotiation. RJ-45 Network connector, Auto MDI/MDIX and RJ-45 Ethernet connector
Serial Interface: RS-232 (EIA-232), asynchronous DTE configured with full modem control and hardware flow control; Configurable as RS-232 or RS-422 or RS-485 (RS-232/422/485)
Serial Connectors: Standard DB-9 male for "D" models, RJ-45 10-pin for "M" models
Optional Adapters: SDS-RJ45-10: RJ-45 10-pin adapter for "D" models, with flying leads for custom configuration
Port-Power: SSE-100D-5V and DSE-100D-5V provide +5V at Pin 9 on the DB-9 serial port connector
Serial Ports: SSE: 1 port    DSE: 2 ports QSE: 4 ports    ESE: 8 ports
OS Support: Windows NT4/2000/XP, Vista and Linux. Raw TCP, Raw UDP, Tunneling, AutoTCP and and IntelliSock™ modes are OS independent.
Data Rate: 921.6 kbps max per port
UARTs: SSE: 16C550 with 16-byte FIFO, DSE/QSE/ESE: 16C750 with 64-byte FIFO
Receiver Inputs:
bullet RS-232: Input Voltage Rating: -15V to +15V, Receiver Skew: 120 ns (typical), 250 ns (maximum)
bullet RS-422/485: Input Voltage Rating: -15V to +15V Common Mode Input Voltage, Receiver Skew: 13 ns (typical)
Transmitter Outputs:
bullet RS-232: High Level Output: +5V (minimum), +5.4V (typical), Low Level Output: -5V (minimum), -5.4V (typical), Transmitter Skew: 50 ns (typical), 200 ns (maximum)
bullet RS-422/485: Transmitter Outputs: 2V min for 100 Ohm load, Transmitter Skew: 5 ns (typical), 10 ns (maximum), Distance: 4000 feet
Parity, Stop bits:
       Parity Configurable as: None, Even, Odd ; Data Bits Configurable as: 5, 6, 7, 8; Stop Bits Configurable as: 1, 1.5, 2
Surge Suppression: Surge suppressor applied to each line that is capable of sustaining up to 40A peak, 8 x 20µs transient surges, a clamping voltage of 30V and a peak energy dissipation of 0.1 Joules. (NOTE: The "SS" option limits data rate to 115.2 kbps due to capacitive loading). Standard on 100D-5V models, optional on all other models.
Hardware: Processor: Freescale™ PowerPC®, SDRAM: 8 MB, FLASH Memory: 2 MB, Firmware stored in FLASH may be upgraded via LAN interface
Protocols and Software:
bullet Management Protocols: UDP, TCP/IP, HTTP, DHCP, ARP, SNMP
bullet IP Configuration Methods: DHCP or Static IP set through Installation Wizard, or custom UDP datagram utility (with command line interface) for unattended installations
bullet Quatech Utilities: Windows Device Manager (Quatech Device Manager in Windows NT), On-board HTML pages accessible from a standard web browser, Simple Network Management Protocol (SNMP), Intellisock™ TCP socket services
bullet Communication modes: Normal, Tunneling, Raw TCP, Auto TCP, Raw UDP, Intellisock TCP socket services    
Power Supply: +5V, 2A (10 W) max DC, with auto-sensing AC adapter provided for 100VAC-240VAC, 50Hz-60Hz worldwide operation
Environment: Operating: 0°C to 70°C, Storage: -40°C to 70°C, Humidity: 10% to 90% non-condensing
Dimensions:
bullet SSE/DSE: Height: 1.18” (2.99 cm), Width: 3.33” (8.46 cm), Depth: 4.69” (11.91 cm)
bullet QSE: Height: 1.35” (3.43 cm), Width: 9.96” (25.30 cm), Depth: 4.69” (11.91 cm)
bullet ESE: Height: 1.96” (4.97 cm), Width: 9.96” (25.30 cm), Depth: 4.69” (11.91 cm)
Certifications: CE, FCC Class B, RoHS and WEEE compliant
Back to Top
Ordering Information
RS-232
SSE-100D
1 port RS-232 Serial Device Server (DB9)
 Ordering Information
SSE-100D-5V 1 port RS-232 Port-Powered Serial Device Server with surge suppression and +5V at pin 9 Ordering Information
DSE-100D 2 port RS-232 Serial Device Server (DB9) Ordering Information
DSE-100D-5V 2 port RS-232 Port-Powered Serial Device Server with surge suppression and +5V at Pin 9 Ordering Information
QSE-100D 4 port RS-232 Serial Device Server (DB9) Ordering Information
QSE-100M 4 port RS-232 Serial Device Server (RJ45) Ordering Information
ESE-100D 8 port RS-232 Serial Device Server (DB9) Ordering Information
ESE-100M -   8 port RS-232 Serial Device Server (RJ45) Ordering Information
RS-232/422/485
SSE-400D 1 port RS-232/422/485 Serial Device Server (DB9) Ordering Information
DSE-400D 2 port RS-232/422/485 Serial Device Server (DB9) Ordering Information
QSE-400D 4 port RS-232/422/485 Serial Device Server (DB9) Ordering Information
QSE-400M 4 port RS-232/422/485 Serial Device Server (RJ45) Ordering Information
ESE-400D 8 port RS-232/422/485 Serial Device Server (DB9) Ordering Information
ESE-400M 8 port RS-232/422/485 Serial Device Server (RJ45) Ordering Information
Embedded
SSE-100D-EMB 1 port embedded RS-232 Serial Device Server (DB-9) Ordering Information
DSE-100D-EMB 2 port embedded RS-232 Serial Device Server (DB-9) Ordering Information
Accessories
SDS-RJ45-10 DB-9 to 10-pin RJ-45 adapter, (RS-232) Ordering Information
DB9F-STA Adapter, DB9F to screw terminal Ordering Information
SS1 Surge suppression package for 1 port Ordering Information
SS2 Surge suppression package for 2 ports Ordering Information
SS4 Surge suppression package for 4 ports Ordering Information
SS8 Surge suppression package for 8 ports Ordering Information
SSE-DIN-01 Din Rail Mounting Kit for SSE/DSE-100/400D Ordering Information
DS-RACK-BLK Rack Mount Kit for QSE/ESE models-Black Ordering Information
TERM-422-D9F Terminator pack for RS-422 (-400 models) Ordering Information
TERM-485-D9F Terminator pack for RS-485 (-400 models) Ordering Information
Back to Top

 
Israel, IL, ישראל

שרת TCP/IP ThinQ  עם מספר יציאות של RS-232/422/485 בחיבור DB9
Our Shop

I  Home  I  Welcome I  Products  I  New Products  I Support  I Close Out  I Shop I Contact I

 

All products names and registered and unregistered trademarks mentioned are for identification purposes only and remain the exclusive property of their respective owners. Please see our disclaimer information.
Copyright © 1999 - 2012 Papyrus Computer Technologies Ltd. All rights reserved, Last update of pages or web December 27, 2011. Best View Microsoft I.E 5.0 or later, 1024x768 Screen Mode