|
Features |
 |
30K Continuous sample rate
|
|
|
8 Channels 14 bit analog input
|
|
|
16 digital I/O
|
|
|
32 Bit pulse counter input
|
|
|
Selectable voltage reference |
|
|
PGA analog inputs |
|
|
USB interface
|
|
Back to Top |
|
Specifications |
| Temperature Range: 0°C to +70°C |
| Software:
Free Easy-to-Use Software!,
Interface Tools for Visual Basic, Visual C++, and Test Point |
|
Analog Input Channels: 8 single
ended or 4 differential, Software selectable |
|
A/D Converter: Burr Brown
ADS7871,14 bit |
|
Analog Inputs: -5V to +5V,
Unipolar and bipolar, Software selectable |
|
Analog Inputs: -5V to +5V,
Unipolar and bipolar, Software selectable |
|
Integral Linearity Error: ± 2 LSB |
| Integral Linearity Error: ± 2 LSB |
| Full Scale Gain Error: ± 0.02% |
| Offset Error: ± 2 LSB @ Ref=2.5
volt |
| Temperature Drift: 10 ppm/ºC
Typical |
|
Voltage Reference: Selectable
5.0, 2.5, 2.0485, 1.15 |
| Analog Gain Values: 1, 2, 4, 5,
8, 10, 16, or 20 (Selectable each channel0 |
|
Bandwidth: 30,000 SPS maximum,
continuous stream mode USB |
|
Digital I/O: 16 digital I/O lines
(two 8 bit ports), I/O line data direction is software selectable |
|
Digital I/O Current: I/O line
source/sink 25 ma, Total current 200 ma for the 8 bit port |
|
Digital I/O Voltage Levels
|
|
Input
Off (0) = 0V - 0.8V |
|
|
Input On (1) = 2.0V - 5.0V |
|
|
Output Off (0) = 0.6V max. |
|
|
Output On (1) = 4.3V min |
|
|
Pulse Counter
|
|
Input 1 MHz max. input rate |
|
|
32 bit counter capture |
|
|
Counter increments on
high-low transition |
|
|
Communications: USB V1.1, 6 feet
maximum distance |
|
Baud
Rate: USB Full speed 12M bits/sec |
|
Command Protocol: Simple ASCII
commands. See the User's Manual |
|
Operating Power: 7.5 VDC to 15.0
VDC, 50 ma nominal, 450 ma max. |
|
Accessories for this unit: 8
Channel analog I/O, 2 Channel analog with instrument amps, Analog I/O DB15
Terminal board, Digital I/O DB25 Terminal board, Digital I/O Board for Opt
Iso modules. |
|
Back to Top |
