| |
P/N |
Product Description |
|
|
|
(multiple P/N's - please open Feature & Specification page to
find P/N's) |
Internal Dual MicroSATA
Ultra DigiDrive (UDD)
 |
Mounts inside any standard 3.5" drive bay, Choice of single or dual mSATA drive slots
|
|
|
Read and Write to any 1.8" device with mSATA interface
including 1.8" SSD, 1.8" hard drive, CF media (via Addonics CF Micro
SATA adapter) |
|
|
Supports hot swap of mSATA device when connects to hot
swappable SATA port or USB port
|
|
|
Complete Plug and Play, Power from PC power supply, Bootable via SATA connection
|
|
|
Connects internally through SATA or USB 2.0 connection
|
|
|
Power and drive access LEDs
|
|
|
Optional CipherChain in SATA connection to add AES
256-bit encryption |
|
|
 |
AAESP35MK
|
Hybrid Port converter for 3.5" bay
|
|
Add Hybrid port to Desktop
system or computing equipment by combining the internal SATA and
USB 5-pin connector into a single Hybrid eSATA / USB connector.
|
|
|
Add Hybrid port to external storage enclosure via
SCSI-1 (centronic 50) connector punch out
|
|
|
With standard 3.5"
drive bay mounting bracket |
|
|
Support 5V BUS power over
eSATA connection using Addonics eSATAp cable
or standard Hybrid eSATA cable
|
|
|
Compatible with Addonics eSATAp CFast reader /
writer |
|
|
 |
AAESPSPCI
|
Hybrid Port converter for PCI or SCSI-1
|
|
Add Hybrid port to Desktop
system or computing equipment by combining the internal SATA and
USB 5-pin connector into a single Hybrid eSATA / USB connector.
|
|
|
Add Hybrid port to external storage enclosure via
SCSI-1 (centronic 50) connector punch out
|
|
|
With PCI and SCSI-1
mounting brackets
|
|
|
Support 5V BUS power over
eSATA connection using Addonics eSATAp cable
or standard Hybrid eSATA cable
|
|
|
Compatible with Addonics eSATAp CFast reader /
writer |
|
|
|
|
KB-108A |
100cm
SATA2(eSATA) -to- SATA External cable |
|
 |
KB-108-2
|
200cm SATA2 (eSATA) External cable |
|
|
|
KB-111 |
SATA 15Pin Y-Type Power Cable
|
|
Serial ATA plug & receptacle 15 pin. |
|
|
Contact: Phosphor bronze. |
|
|
Contact area Plating: Gold flash over
nickel. |
|
|
 |
KB-116-e2
|
Internal SATA (L type) --- > External
eSATA II (I type) 2Port Host Bracket Cable 30cm |
|
|
|
MSXUDDEU
|
Pocket Micro SATA UDD
|
|
Portable - compact size and light weight
|
|
|
Read and Write to any 1.8" device with Micro SATA (mSATA)
connector including 1.8" SSD, 1.8" hard drive, CF media (via Addonics
Micro SATA CF adapter) |
|
|
Supports hot swap of Micro SATA (mSATA) device when
connecting to hot swappable SATA port or USB port, Powered directly from USB port, Bootable via eSATA connection
|
|
|
Connects to any computer via eSATA or USB 2.0 connection
|
|
|
Power and drive access LEDs
|
|
|
 |
ST-101L |
Serial ATA TO Parallel ATA
|
|
48 bits LBA breaks capacity limit in order to
support HDD larger than 137GB
|
|
|
Mini Board size (59mm x 25mm), No space wasted
|
|
|
Supports Spread Spectrum in receiver |
|
|
Compatible with Ultra ATA 133 |
|
|
 |
ST-101DK |
Slimline
Optical Drive to SATA ODD Bridge Board with Mounting Bracket and Screws
|
|
Can Attach to
all types of ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE slim
devices (DVD, DVD-RAM, MO, CD-ROM, CD-RW, ….)
|
|
|
Compatible
with Ultra ATA 133 |
|
|
100% hardware
bridge converter to support PC, MAC and Linux environment
|
|
|
 |
ST-106 |
IDE
Device Mini Vertical Bridge (for SATA device)
|
|
Supports any type of SATA
device (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk,.)
|
|
|
48 bits LBA can break capacity
limit to support HDD larger than 137GB
|
|
|
Mini board size (75mm x 26mm),
No space wasted |
|
|
 |
ST-126DA |
SATA II 3Gbps 1-To-5 Port Multiplier
bridge board (for 5bay Disk Array)
|
|
1-to-5 native
SATA II Port Multiplier
|
|
|
Shielded and
durable eSATA connector for host connection
|
|
|
Full support
for FIS-based switching and command-based switching SATA host
controllers |
|
|
 |
ST-126PC |
5Bay SATA Enclosure Board for PC Case (5x Port Multiplier to eSATA Host)
|
|
Support RAID 5Bay
Storage system with RAID 0, RAID 1, JBOD, BigDrive and
RAID 10 |
|
|
5 Ports SATA II 3Gbps Hardware RAID (Port Multiplier
Based) |
|
|
Shielded and durable eSATA connector for host
connection |
|
|
 |
ST-126RM |
SATA II 3Gbps 1-To-5 Port Multiplier bridge board
(for Rack Mount)
|
|
1-to-5 native
SATA II Port Multiplier
|
|
|
Shielded and
durable eSATA connector for host connection
|
|
|
Full support
for FIS-based switching and command-based switching SATA host
controllers |
|
|
 |
ST-128PC |
SATA device Enclosure Board for PC Case (to USB2.0 Host)
|
|
Supports any type of SATA Device (DVD, DVD-RAM, MO,
CD-ROM, CD-RW, Hard Disk, ….) |
|
|
USB2.0 High transfer rate of 480Mbps
|
|
|
 |
ST-131PC |
4Bay SATA Enclosure Board for PC Case (to Multilane SATA Host)
|
|
Multilane SATA
port for SATA II Host connection
|
|
|
Supply 4 SATA hard drives as a 4Bay
Storage system |
|
|
 |
ST-132PC |
H/W RAID 2x SATA
Enclosure Board for PC Case (to eSATA and USB2.0 Host)
|
|
Easy Hardware RAID
setting by Rotary DIP Switch Design. |
|
|
Support RAID 2Bay Storage System with Raid0, Raid1, JBOD,
BIG, SAFE50, SAFE 33 |
|
|
 |
ST-134PC |
4Bay SATA Enclosure Board for PC Case (to 4 eSATA Host)
|
|
Supports High Speed Transfer of 1.5Gbps SATA and
3Gbps SATAII |
|
|
4 SATA devices as a 4Bay Storage system |
|
|
Shielded and durable eSATA connectors for Host
connection |
|
|
|
|
ST-139F
|
Two 2.5”
to RAID0 High Performance 3.5” SATA Drive Adapter with Frame
|
|
3Gbps SATA II high transfer rate. Work with SATA II or SATA I or USB2.0 Host Port
|
|
|
H/W Raid 0 double the SSD reading performance to
the world fastest drive
|
|
|
22Pin SATA connector and 5Pin USB2.0 Pin Header
for host connection
|
|
|
Two 22 pin SATA (Signals and Power) female
connector on board to 2.5” SSD or HDD
|
|
|
Support Hardware Raid 0 (FAST, Stripping) and
Non-Raid (2 Drives) modes, Supports NCQ
|
|
|
Easy Hardware RAID setting by Jumper
|
|
|
Hot-plug and ATAPI support
|
|
|
Complies with USB 2.0 specification transfer rate
480 Mb/s |
|
|
Includes a set of metal frame and screws that
convert dual 2.5” drives to a 3.5” Drive form factor
|
|
|
100% OS-transparent hardware converter to support
PC, MAC and Linux, no driver required
|
|
|
 |
ST-176PC |
H/W RAID 5Bay SATA Enclosure Board for PC Case (to eSATA Host)
|
|
Support RAID 5Bay
Storage system with RAID 0, RAID 1, JBOD, BigDrive and
RAID 10 |
|
|
5 Ports SATA II 3Gbps Hardware RAID (Port Multiplier
Based) |
|
|
Shielded and durable eSATA connector for host
connection |
|
|
 |
UB-111H |
SATA SSD to USB2.0 External use
|
|
Attached
to 2.5” SATA SSD or HDD directly
|
|
|
No power
adapter required, SSD powered by two Host USB 5V bus power
|
|
|
Includes
a 2 -to -1 USB Y-cable
|
|
|
