| |
P/N |
Product Description |
|
 |
ST-101L |
Serial ATA TO Parallel ATA
 |
48 bits LBA breaks capacity limit in order to
support HDD larger than 137GB
|
|
|
Mini Board size (59mm x 25mm), No space wasted
|
|
|
Supports Spread Spectrum in receiver |
|
|
Compatible with Ultra ATA 133 |
|
|
 |
ST-106 |
IDE
Device Mini Vertical Bridge (for SATA device)
|
|
Supports any type of SATA
device (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk,.)
|
|
|
48 bits LBA can break capacity
limit to support HDD larger than 137GB
|
|
|
Mini board size (75mm x 26mm),
No space wasted |
|
|
 |
ST-101DK |
Slimline
Optical Drive to SATA ODD Bridge Board with Mounting Bracket and Screws
|
|
Can Attach to
all types of ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE slim
devices (DVD, DVD-RAM, MO, CD-ROM, CD-RW, ….)
|
|
|
Compatible
with Ultra ATA 133 |
|
|
100% hardware
bridge converter to support PC, MAC and Linux environment
|
|
|
 |
ST-307P4
|
IDE44 – CF
Bridge (Connector Mode)
|
|
44 pin IDE standard Port |
|
|
Supports IDE Master and Slave mode
|
|
|
Support CompactFlash cards (Type I & II) or a IBM
Microdrive |
|
|
The CF card can be the primary bootable device
containing the OS and application
|
|
|
|
|
ST-307 |
IDE – CF Bridge (Connector Mode)
|
|
40 pin IDE standard Port
|
|
|
Support CompactFlash cards (Type I & II) or a IBM
Microdrive |
|
|
The CF card can be the primary boot device containing
the OS and application. Transparent to the operating system and does not
require any drivers |
|
|
 |
ST-307P4M |
CF
---> 2.5” IDE HDD Bridge Board
|
|
Convert CF to slim
line 2.5 inch IDE HDD ! |
|
|
44 pin IDE male connector on board
|
|
|
Supports IDE Master and Slave
|
|
|
The CF card can be the primary bootable device
containing the OS and application
|
|
|
 |
ST-308 |
IDE – CF
Bridge (Internal Use)
|
|
Supports 40 pin & 44 pin IDE standard Port both |
|
|
Support Compact Flash cards (Type I & II) or a
IBM Microdrive |
|
|
The CF card can be the primary bootable device
containing the OS and application
|
|
|
Supports jumper for master and slave setting
|
|
|
 |
ST-308B |
IDE – CF Bridge (Bracket Mode)
|
|
Supports 40 pin & 44 pin IDE standard Port both
|
|
|
Support Compact Flash cards (Type I & II) or a
IBM Microdrive |
|
|
Supports jumper for master and slave setting
|
|
|
The CF card can be the primary bootable device
containing the OS and application
|
|
|
 |
ST-308F |
IDE – CF Bridge (Front Mode)
|
|
Supports 40 pin & 44 pin IDE standard Port both
|
|
|
Support Compact Flash cards (Type I & II) or a
IBM Microdrive |
|
|
Supports jumper for master and slave setting
|
|
|
The CF card can be the primary bootable device
containing the OS and application
|
|
|
 |
ST-317P4M |
Duo Compact Flash 2.5” IDE HDD Bridge Board
|
|
Convert two CF to slim line 2.5 inch
IDE Low Power Hard Drive! |
|
|
44 pin IDE male connector on board
|
|
|
Support CompactFlash cards (Type I)
|
|
|
The CF card can be the primary bootable device
containing the OS and application.
|
|
|
