| |
P/N
|
Product Description |
|
|
|
21AL-107
|
3.5" to 5.25" Mounting Frame
 |
Mount a 3.5"
drive on a 5.25" bay |
|
|
Beige colored front plate |
|
|
|
|
9PINFF
|
9 Pin Female to
Female Serial Cable
|
|
This is a standard female-to-female serial
cable. Great for connecting any serial device with a DB-9 connector to a
PC. |
|
|
|
|
9PINMF
|
9 Pin Male to
Female Serial Cable
|
|
This is a standard male-to-female serial
cable. Great for connecting any serial device with a DB-9 connector to a
PC. |
|
|
|
|
9PINMM
|
9 Pin Male to
Male Serial Cable
|
|
This is a standard male-to-male serial
cable. Great for connecting any serial device with a DB-9 connector to a
PC. |
|
|
 |
BRACKET252
|
2.5
inch HDD/SSD bracket for 3.5 inch drivers
|
|
Let your add two 2.5" hard disk drives
fitted into a 3.5" drive bay |
|
|
Maximize the internal space of your
computer case for efficient usage |
|
|
2 packs of screws included for mounting
the disks and the bracket into the PC case |
|
|
 |
BRACKET5250
|
3.5" HDD Bracket For 5.25" Drive Bay
|
|
Let your 3.5" hard disk drives completely
fitted into a 5.25" drive bay |
|
|
Maximize the internal space of your
computer case for efficient usage |
|
|
Work with 3.5" internal car reader or
HUBS hubs as well other devices. |
|
|
Eight screws included for mounting the
bracket into the PC case |
|
|
 |
DT-116
|
PCI-e 1x bus to 16x Socket
Extension Card
|
|
Supports
1-lane 2.5Gbps PCI Express. |
|
|
Supports 16x
PCI Express. |
|
|
Best Riser for
PCI-e architecture Rack Mount system
|
|
|
 |
EK-109U |
USB Dongles Adapter with Extension
cable for USB-Based ExpressCard
|
|
Connects ExpressCard 3.5G HSDPA,
Broadband Wireless, memory, 3G modems and WiMax with all your Desktop, Laptop
and Notebook through USB port! |
|
|
 |
FW-300
|
IEEE-1394a Repeater Hub
|
|
Fully Compliant with 1394a-2000/1394-1995
Standards |
|
|
Provides up to two (2) IEEE-1394a Ports
for Device Connections |
|
|
Supports Data Transfer Rate of
400/200/100 Mbps |
|
|
Supports Simultaneous Operation for
Multiple IEEE-1394a Devices |
|
|
Supports Hot-Swapping for a Quick Switch
in IEEE-1394a Devices without Shutting Down your PC |
|
|
Supports Both Adaptor & Bus Powered Mode |
|
|
 |
FW-300B
|
IEEE-1394b Repeater Hub
|
|
Fully Compliant with IEEE-1394b Standards |
|
|
Provides up to three (3) IEEE-1394b Ports
for Device Connections |
|
|
Supports Data Transfer Rate of
800/400/200/100 Mbps |
|
|
Supports Simultaneous Operation for
Multiple IEEE-1394b Devices |
|
|
Supports Hot-Swapping for a Quick Switch
in IEEE-1394b Devices without Shutting Down PC |
|
|
Supports Both Adaptor & Bus Powered Mode |
|
|
 |
HD-25BOX
|
Dual 2.5" Hard Drives Protection Box
|
|
Store two 2.5" IDE/SATA Hard Drives |
|
|
Easy writing memo label and side label
for your drives management. |
|
|
Anti-Static, Dust free, Shock proof,
Organized, color box |
|
|
Size, Weight and material: Plastic,
63gram, 116 x 88 x 35mm |
|
|
 |
HD-35BOX
|
3.5"Hard Drive Protection Box
|
|
Easy writing memo label and side label
for your drives management. |
|
|
Anti-Static, Dust free, Shock proof,
Organized, color box |
|
|
Size, Weight and material: Plastic,
91.5gram, 162 x 120 x 36mm |
|
|
 |
HUB-023
|
Aluminum USB 2.0 Hub 4 ports
|
|
Aluminum made. |
|
|
Adds 4 USB 2.0 Hi-Speed ports. |
|
|
Fully compliant with USB 2.0
specifications. Backward compatibility with USB 1.1 |
|
|
Support data transfer rate of
1.5/12/480Mbps. |
|
|
Plug & Play installation |
|
|
Support Windows 98, 2000, ME, XP, Vista,
Win 7 |
|
|
Support Mac OS 8.6 and above |
|
|
Self-Powered Mode Mimicking (Driving +5
VDC Total Mini. 500mA From Host PC), Optional External Power Source for
more port power driving |
|
|
 |
HUB-038
|
USB 2.0 Hub 7 ports
|
|
Adds 7 USB 2.0 Hi-Speed ports. |
|
|
Fully compliant with USB 2.0
specifications. Backward compatibility with USB 1.1 |
|
|
Support data transfer rate of
1.5/12/480Mbps. |
|
|
Plug & Play installation |
|
|
Support Windows 98, 2000, ME, XP, Vista,
Win 7 |
|
|
Support Mac OS 8.6 and above |
|
|
Self-Powered Mode Mimicking (Driving +5
VDC Total Mini. 500mA From Host PC), Optional External Power Source for
more port power driving |
|
|
 |
HUB-041
|
USB 2.0 Hub 4 ports
|
|
Adds 4 USB 2.0 Hi-Speed ports. |
|
|
Fully compliant with USB 2.0
specifications. Backward compatibility with USB 1.1 |
|
|
Support data transfer rate of
1.5/12/480Mbps. |
|
|
Plug & Play installation |
|
|
Support Windows 98, 2000, ME, XP, Vista,
Win 7 |
|
|
Support Mac OS 8.6 and above |
|
|
 |
KB-116-e2
|
Internal SATA (L type) --- > External
eSATA II (I type) 2Port Host Bracket Cable 30cm |
|
 |
PS121
|
USB
to PS/2 Adapter
|
|
Connect two PS/2 (keyboard and mouse) to your USB
Computer connection |
|
|
Based USB HID class Version. 1.1 |
|
|
 |
PTP-101
|
Mini PCI to PCI Adaptor
|
|
Enables Mini-PCI Cards to be Plugged into
any PCI Slots |
|
|
Perfect for Mini-PCI Devices |
|
|
Quick and Easy Installation by Plug &
Play |
|
|
|
|
SLOA002
|
2.5 Inch IDE To 3.5 Inch IDE Hard
Driver Adapter
|
|
40-Pin
standard male IDE connector. |
|
|
44-Pin
standard female IDE connector. |
|
|
Easy
to connect 2.5 inch hard disk driver to desktop computer. |
|
|
4-Pin
hard disk driver power supply. |
|
|
No
driver is needed. |
|
|
Size :
89mm * 34mm. |
|
|
|
|
SLOA004
|
Power cable 2.5 Inch IDE To 3.5 Inch
IDE Hard Driver Adapter
|
|
40-Pin
standard male IDE connector. |
|
|
44-Pin
standard female IDE connector. |
|
|
Easy
to connect 2.5 inch hard disk driver to desktop computer. |
|
|
4-Pin
hard disk driver power supply cable. |
|
|
No
driver is needed. |
|
|
|
|
SLOA012
|
Mountable 2.5 Inch IDE To 3.5 Inch
IDE Hard Driver Adapter
|
|
40-Pin
standard male IDE connector. |
|
|
44-Pin
standard female IDE connector. |
|
|
Easy
to connect 2.5 inch hard disk driver to desktop computer. |
|
|
4-Pin
hard disk driver power supply. |
|
|
No
driver is needed. |
|
|
The
adapter comes with all necessary hardware to mount the drives. |
|
|
 |
SLPS001
|
1U 32Bit
Single Slot 90-Degree Right Angle PCI Riser Card
|
|
High Quality 1U Riser Card for any 1U
chassis. |
|
|
Gold plated contacts for best
connectivity and long life. |
|
|
32-Bit Direct Plug-in Riser Card . |
|
|
Expansion for 1 slot . |
|
|
Size : 99mm x 26mm . |
|
|
 |
SLPS005
|
PCI-Express 16X Riser Card
|
|
Gold-plated fingers with excellent EMI
characteristics, |
|
|
Interface: PCI Express 16x
|
|
|
PCB Layers: 4, |
|
|
Size : 116 mm x 41 mm x 13 mm, |
|
|
Weight: 24g, |
|
|
 |
SLPS011
|
2U 32Bit
Single Slot 90-Degree Right Angle PCI Riser Card
|
|
4 layers PCB board. |
|
|
32-Bit Direct Plug-in riser card. |
|
|
This riser card provides expansion for 1
slots. |
|
|
Gold plated contacts for best
conductivity and long life . |
|
|
No Driver necessary and jump-less. |
|
|
Size : 110mm x 48mm . |
|
|
 |
SLPS012
|
Dual Slot 90-Degree Right Angle PCI Riser Card
|
|
4 layers PCB board. |
|
|
32-Bit Direct Plug-in riser card |
|
|
This riser card provides expansion for 2
slots |
|
|
Gold plated contacts for best
conductivity and long life |
|
|
No Driver necessary |
|
|
Dimension: 130mm x 57mm |
|
|
Weight: 56g |
|
|
 |
SLPS013
|
32Bit 3-Slot PCI Riser Card
|
|
PCB Layers: 4 |
|
|
32-Bit Direct Plug-in riser card. |
|
|
This riser card provides expansion for 3
slots. |
|
|
Gold plated contacts for best
conductivity and long life. |
|
|
No Driver necessary and jump-less. |
|
|
 |
SLPS021
|
PCI-X 1U Server 64-Bit Single Slot Right Angle Riser Card
|
|
PCI-X 64-Bit Interface. 64-Bit Direct
Plug-in Riser Card. |
|
|
4 layers PCB board. |
|
|
High Quality 1U Riser Card for any 1U
chassis. Expansion for 1 slot. |
|
|
Gold plated contacts for best
connectivity and long life. |
|
|
Support PCI 32bit/33MHz, 64bit/66MHz, And
PCI-X 64bit/66MHz, 100MHz, 133MHz. |
|
|
Size: 158.2mm x 27mm x 20.5mm. |
|
|
Weight: 39g . |
|
|
|
|
SLPS015 |
Flexible 32Bit Single Slot PCI Riser
Card
|
|
Easy
Plug and Play Installation |
|
|
PCI
Express 16x one slot |
|
|
PCI 32
bit Bus one slot |
|
|
Easily
fits into standard PC cases |
|
|
Dimension: 130mm x 117.5mm |
|
|
 |
SLPS051
|
PCI-Express 1U 16X Riser Card
|
|
Gold-plated fingers with excellent EMI
characteristics. |
|
|
Interface: PCI Express 16x. |
|
|
PCB Layers: 4 |
|
|
Size : 174 mm x 26 mm x 13 mm |
|
|
 |
SLPS053
|
PCI-Express 1U 16X Riser Card
|
|
Gold-plated fingers with excellent EMI
characteristics |
|
|
Interface: PCI Express 16x |
|
|
PCB Layers: 4 |
|
|
Size : 120.3 mm x 26.5 mm x 13.8 mm |
|
|
Weight : 19.5g |
|
|
 |
SLPS054
|
PCI-Express 1x Extender Riser Card
|
|
Gold-plated fingers and excellent EMI
characteristics specifications |
|
|
Interface: PCI Express 1x |
|
|
Size : 35.2mm x 30.5mm |
|
|
 |
SLPS055
|
PCI-Express 4x Extender Riser Card
|
|
Gold-plated fingers and excellent EMI
characteristics specifications |
|
|
Interface: PCI Express 4x |
|
|
Size : 58.5mm x 27.8mm x 8mm |
|
|
Weight: 6.8g |
|
|
 |
SLPS056
|
PCI-Express 8x 90-Degree Right Angle Riser Card
|
|
Gold-plated fingers and excellent EMI
characteristics specifications |
|
|
Interface: PCI Express 8x |
|
|
Size : 70.8mm x 32.5mm x 13.6mm |
|
|
Weight: 13g |
|
|
|
|
SLPS057 |
Flexible Single Slot
PCI-Express 16x Riser Card
|
|
PCI-Express
16x Slots. |
|
|
This riser
card provides expansion for 1 slots with cable. |
|
|
Fit for 1U /
2U rack mount chassis. |
|
|
Gold plated
contacts for best conductivity and long life. |
|
|
No Driver
necessary and jumper-less. |
|
|
Flat Cable
Length :100mm |
|
|
Weight: 65g. |
|
|
|
|
SLPS064 |
Flexible PCI-Express 1x Riser Card
|
|
PCI-Express 1x Slots. |
|
|
Riser card provides expansion for 1 slots
with cable. |
|
|
Fit for 1U / 2U rack mount chassis. |
|
|
Gold plated contacts for best
conductivity and long life. |
|
|
No Driver necessary and jump-less. |
|
|
Flat Cable Length :120mm |
|
|
 |
SLPS065
|
Flexible PCI-E 4x
Riser Card Extender
|
|
PCI-Express 4x Slots. |
|
|
This riser card provides expansion for 1
slots with cable. |
|
|
Fit for 1U / 2U rackmount chassis. |
|
|
Gold plated contacts for best
conductivity and long life . |
|
|
No Driver necessary and jump-less . |
|
|
Flat Cable Length :150mm |
|
|
 |
SLPS068
|
Flexible PCI-E 8x
Riser Card Extender
|
|
PCI-Express 8x Slots. |
|
|
This riser card provides expansion for 1
slots with cable. |
|
|
Fit for 1U / 2U rackmount chassis. |
|
|
Gold plated contacts for best
conductivity and long life . |
|
|
No Driver necessary and jump-less . |
|
|
Flat Cable Length :150mm |
|
|
|
|
SLPS091 |
Bracket PCI To PCI-E 1x Riser Card
Extender
|
|
Easy
Plug and Play Installation.
|
|
|
PCI 32
bit 33Mhz Bus one slot. |
|
|
Connects to a standard 5 volt power supply connector. |
|
|
Easily
fits into standard PC cases. |
|
|
PCI
Express 1 Lane Port (1 virtual channel), 2.5Gbps per direction. |
|
|
Supports PCI 32 bit 33MHz bus one slot. |
|
|
PCI-Express Specification Version 1.0 Compliant. |
|
|
PCI
Specification Version 2.3 Compliant. |
|
|
Combination low profile PCI 32 bit host card. |
|
|
Dimension: 125mm x 47mm.(bracket 120mm). |
|
|
Net
Weight: 48g. |
|
|
|
|
SLPS092 |
Bracket PCI-E 16x to PCI 32Bit Riser
Card Extender
|
|
Easy
Plug and Play Installation |
|
|
PCI
Express 16x one slot |
|
|
PCI 32
bit Bus one slot |
|
|
Easily
fits into standard PC cases |
|
|
Dimension: 130mm x 117.5mm |
|
|
 |
ST-126DA |
SATA II 3Gbps 1-To-5 Port Multiplier
bridge board (for 5bay Disk Array)
|
|
1-to-5 native
SATA II Port Multiplier
|
|
|
Shielded and
durable eSATA connector for host connection
|
|
|
Full support
for FIS-based switching and command-based switching SATA host
controllers |
|
|
 |
ST-126PC |
5Bay SATA Enclosure Board for PC Case (5x Port Multiplier to eSATA Host)
|
|
Support RAID 5Bay
Storage system with RAID 0, RAID 1, JBOD, BigDrive and
RAID 10 |
|
|
5 Ports SATA II 3Gbps Hardware RAID (Port Multiplier
Based) |
|
|
Shielded and durable eSATA connector for host
connection |
|
|
 |
ST-126RM |
SATA II 3Gbps 1-To-5 Port Multiplier bridge board
(for Rack Mount)
|
|
1-to-5 native
SATA II Port Multiplier
|
|
|
Shielded and
durable eSATA connector for host connection
|
|
|
Full support
for FIS-based switching and command-based switching SATA host
controllers |
|
|
 |
ST-128PC |
SATA device Enclosure Board for PC Case (to USB2.0 Host)
|
|
Supports any type of SATA Device (DVD, DVD-RAM, MO,
CD-ROM, CD-RW, Hard Disk, ….) |
|
|
USB2.0 High transfer rate of 480Mbps
|
|
|
 |
ST-131PC |
4Bay SATA Enclosure Board for PC Case (to Multilane SATA Host)
|
|
Multilane SATA
port for SATA II Host connection
|
|
|
Supply 4 SATA hard drives as a 4Bay
Storage system |
|
|
 |
ST-132PC |
H/W RAID 2x SATA
Enclosure Board for PC Case (to eSATA and USB2.0 Host)
|
|
Easy Hardware RAID
setting by Rotary DIP Switch Design. |
|
|
Support RAID 2Bay Storage System with Raid0, Raid1, JBOD,
BIG, SAFE50, SAFE 33 |
|
|
 |
ST-134PC |
4Bay SATA Enclosure Board for PC Case (to 4 eSATA Host)
|
|
Supports High Speed Transfer of 1.5Gbps SATA and
3Gbps SATAII |
|
|
4 SATA devices as a 4Bay Storage system |
|
|
Shielded and durable eSATA connectors for Host
connection |
|
|
 |
ST-137MF |
Compact
Flash to 3.5” SATA Disk Bridge Board (With 3.5” HDD Frame)
|
|
Convert CF to as low power 3.5 inch SATA Hard Drive |
|
|
Support CompactFlashTM cards (Type I & II) or a IBM MicrodriveTM
|
|
|
22 pin SATA (Signals and Power) male connector on board
|
|
|
Transparent to the operating system and does not require any
drivers
|
|
|
 |
ST-138 |
H/W
RAID Dual-CF 2.5” SATA Flash Disk Adapter
|
|
Supports Hardware RAID 1, Hardware RAID 0 and Hardware
BigDrive modes |
|
|
Support two
Type I & II CompactFlashTM memory cards |
|
|
Includes 2.5 “
hard drive frame to use like a standard 2.5" HDD
|
|
|
Optional 3.5”
frame for 3.5” drive bay installation
|
|
|
|
|
ST-139F
|
Two 2.5”
to RAID0 High Performance 3.5” SATA Drive Adapter with Frame
|
|
3Gbps SATA II high transfer rate. Work with SATA II or SATA I or USB2.0 Host Port
|
|
|
H/W Raid 0 double the SSD reading performance to
the world fastest drive
|
|
|
22Pin SATA connector and 5Pin USB2.0 Pin Header
for host connection
|
|
|
Two 22 pin SATA (Signals and Power) female
connector on board to 2.5” SSD or HDD
|
|
|
Support Hardware Raid 0 (FAST, Stripping) and
Non-Raid (2 Drives) modes, Supports NCQ
|
|
|
Easy Hardware RAID setting by Jumper
|
|
|
Hot-plug and ATAPI support
|
|
|
Complies with USB 2.0 specification transfer rate
480 Mb/s |
|
|
Includes a set of metal frame and screws that
convert dual 2.5” drives to a 3.5” Drive form factor
|
|
|
100% OS-transparent hardware converter to support
PC, MAC and Linux, no driver required
|
|
|
 |
ST-168M
|
mSATA SSD to 2.5”
SATA Drive Converter with 2.5” Metal Frame
|
|
Convert mSATA SSD to 2.5” Form Factor |
|
|
22 pin SATA (Signals and Power) male
connector on board |
|
|
The mSATA SSD can be the primary bootable
device containing the OS and application.
|
|
|
Includes 2.5 “ drive metal frame with 8
mounting holes |
|
|
Transparent to the operating system and
does not require any drivers |
|
|
Supports Windows, Mac and Linux OS |
|
|
|
|
ST-168MF
|
mSATA SSD to 3.5”
SATA Drive Converter with 3.5” Metal Frame
|
|
Convert mSATA SSD to 3.5” Form Factor |
|
|
22 pin SATA (Signals and Power)
male connector on board |
|
|
The mSATA SSD can be the primary bootable
device containing the OS and application.
|
|
|
Includes 3.5 “ drive metal frame
with mounting holes |
|
|
Transparent to the operating system and
does not require any drivers |
|
|
Supports Windows, Mac and Linux OS |
|
|
 |
ST-176PC |
H/W RAID 5Bay SATA Enclosure Board for PC Case (to eSATA Host)
|
|
Support RAID 5Bay
Storage system with RAID 0, RAID 1, JBOD, BigDrive and
RAID 10 |
|
|
5 Ports SATA II 3Gbps Hardware RAID (Port Multiplier
Based) |
|
|
Shielded and durable eSATA connector for host
connection |
|
|
 |
ST-187
|
Dual mini-SAS SFF-8088 to SFF-8087 Low
profile PCIe Host Adapter
|
|
Support max SAS Host or SATA Host eight
Ports connection |
|
|
Supports High Speed Transfer rate of
6Gbps |
|
|
External Dual mini-SAS SFF-8088 26pin
connectors to dual internal SFF-8087 connectors |
|
|
Fully compliant with SFF-8088 & SFF-8087
Specification |
|
|
Low Profile PCIe Form Factor |
|
|
Includes Low Profile and regular size
PCIe two Brackets |
|
|
 |
ST-187RM
|
Dual
mini-SAS SFF-8088 to SFF-8087 Adapter with SCSI-1 Frame
|
|
Supports High Speed Transfer rate of
6Gbps |
|
|
Supports SAS or SATA drives x8 |
|
|
External Dual mini-SAS SFF-8088 26pin
sockets connection to dual SFF-8087 connectors |
|
|
Fully compliant with SFF-8088 & SFF-8087
Specification |
|
|
Bridge Board (L-type) SCSI-1 (Centronic
50pin) Metal frame and Mounting hole Includes screws |
|
|
 |
ST-311 |
RAID
0, 1, 10 Quad-CF Low Profile PCI Flash RAID Disk Adapter
|
|
Supports Four Compact Flash
memory cards |
|
|
Supports Raid 0, Raid 1 and Raid
10 |
|
|
CF1 &CF2 Support CompactFlashTM
card Type I & II & IBM MicrodriveTM, CF3 & CF4 Support CompactFlashTM
card Type I card
|
|
|
 |
UB-102PC |
2Bay IDEx2
Enclosure Board for PC Case (to USB2.0 Host)
|
|
Control and Convert 2 internal IDE hard drive to USB 2.0 |
|
|
Supports PCI bracket and uses dominant PC Case as MultiBay Storage
System |
|
|
USB2.0 B-Type upstream connector supports High
transfer rate of 480Mbps |
|
|
 |
UB-104PC |
4Bay IDEx4
Enclosure Board for PC Case (to USB2.0 Host)
|
|
Control and Convert 4 internal IDE hard drive to USB 2.0 host.
|
|
|
USB2.0 B-Type connector supports High transfer rate of 480Mbps
|
|
|
Supports three operation modes: 4Disks, 2Disks, 1Disk (BigDrive)
|
|
|
 |
UB-116F
|
USB 3.0 4Port HUB in 3.5” Front Bay
|
|
USB 3.0 big power charger & HUB for front
use |
|
|
Compliant with Universal Serial Bus 3.0
Specification Revision 1.0 |
|
|
Four USB 3.0 Type A downstream ports with
sufficient bus power |
|
|
All USB3.0 ports can handle Super Speed
(5 Gbps), High Speed (480 Mbps), Full Speed (12 Mbps and Low Speed (1.5
Mbps) transaction |
|
|
Support any USB3.0, USB2.0 and USB1.1
devices |
|
|
