| |
P/N
|
Product Description |
|
|
|
PE-111R
|
ATA133 Raid Low Profile PCI-Express
Host
|
|
|
|
PE-116 |
6G SATA III 2Ports Plus ATA-133 1 Port Low Profile PCIe 2.0
Host Adapter
 |
6Gbps SATA III 2 Ports and ATA133 1 port
PCIe Gen2 1 Lane Host Adapter |
|
|
Compliant with 5Gbps PCI Express 2.0 |
|
|
Supports SATA III transfer rate of
6.0Gbps, 3.0Gbps 1.5Gbps |
|
|
Supports Native Command Queuing (NCQ) |
|
|
Supports Port Multiplier FIS-based or
Command-based switching |
|
|
Supports ATA and ATAPI commands |
|
|
Supports ATA DMA protocols and up to UDMA
150 MBps transfer mode |
|
|
Supports ATA Master and Slave operation |
|
|
Low Profile PCI Form Factor |
|
|
Completely with drivers for 64bit / 32bit
Windows 7, Vista, XP and Server 2003
|
|
|
|
|
SLOA002
|
2.5 Inch IDE To 3.5 Inch IDE Hard
Driver Adapter
|
|
40-Pin
standard male IDE connector. |
|
|
44-Pin
standard female IDE connector. |
|
|
Easy
to connect 2.5 inch hard disk driver to desktop computer. |
|
|
4-Pin
hard disk driver power supply. |
|
|
No
driver is needed. |
|
|
Size :
89mm * 34mm. |
|
|
|
|
SLOA012
|
Mountable 2.5 Inch IDE To 3.5 Inch
IDE Hard Driver Adapter
|
|
40-Pin
standard male IDE connector. |
|
|
44-Pin
standard female IDE connector. |
|
|
Easy
to connect 2.5 inch hard disk driver to desktop computer. |
|
|
4-Pin
hard disk driver power supply. |
|
|
No
driver is needed. |
|
|
The
adapter comes with all necessary hardware to mount the drives. |
|
|
|
|
SLCI4001 |
Universal 40-pin Male IDE To CF Card
Adapter
|
|
40-Pin
standard male IDE connector. |
|
|
50-Pin
standard compact flash socket. |
|
|
+5 V
floppy disk drive power connector. |
|
|
Two
mounting holes. |
|
|
Master
or slave mode selection. |
|
|
Each
jumper has a cap , cap on Pin 1-2 is master , cap on Pin 2-3 or
no cap is slave . |
|
|
Compatible with Compact Flash Type I, Type II, and support IBM
Micro-drive with CF-II interface. |
|
|
Supports DMA and Ultra DMA modes. A compatible flash media card
will be required to use these modes. |
|
|
Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP,
Vista, Unix, Linux . |
|
|
Size:
61mm * 44mm . |
|
|
|
|
SLCI4403
|
Flat Laptop 44-Pin Female IDE To CF
Card Adapter
|
|
44-Pin
standard Female IDE connector. |
|
|
50-Pin
standard compact flash socket. |
|
|
Power
supply from IDE. |
|
|
Directly plugged into IDE connector on the motherboard without
an IDE cable. |
|
|
Master
or slave mode selection. |
|
|
Each
jumper has a cap , Mode select , cap on is master , cap off is
slave. |
|
|
Compatible with Compact Flash Type I, Type II, and support IBM
Micro-drive with CF-II interface. |
|
|
Supports DMA and Ultra DMA modes. A compatible flash media card
will be required to use these modes. |
|
|
Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP,
Vista, Unix, Linux. |
|
|
Size:
52mm * 42mm . |
|
|
|
|
SLCI4406
|
Big PCB Laptop 44-Pin Male IDE To CF
Card Adapter
|
|
44-Pin
standard Female IDE connector. |
|
|
50-Pin
standard compact flash socket. |
|
|
Power
supply from IDE. |
|
|
Directly plugged into IDE connector on the motherboard without
an IDE cable. |
|
|
Master
or slave mode selection. |
|
|
Each
jumper has a cap , Mode select , cap on is master , cap off is
slave. |
|
|
Compatible with Compact Flash Type I, Type II, and support IBM
Micro-drive with CF-II interface. |
|
|
Supports DMA and Ultra DMA modes. A compatible flash media card
will be required to use these modes. |
|
|
Compatible* with DOS, Windows 3.1, NT4, 98SE, Me, 2000 and XP,
Vista, Unix, Linux. |
|
|
Size:
52mm * 42mm . |
|
|
 |
ST-101L |
Serial ATA TO Parallel ATA
|
|
48 bits LBA breaks capacity limit in order to
support HDD larger than 137GB
|
|
|
Mini Board size (59mm x 25mm), No space wasted
|
|
|
Supports Spread Spectrum in receiver |
|
|
Compatible with Ultra ATA 133 |
|
|
 |
ST-101DK |
Slimline Optical Drive to SATA ODD Bridge
Board with Mounting Bracket and Screws
|
|
Can Attach to all types of ATAPI, ATA/133,
ATA/100, ATA/66, ATA/33, EIDE and IDE slim devices (DVD, DVD-RAM, MO,
CD-ROM, CD-RW, ….)
|
|
|
Compatible with Ultra ATA 133
|
|
|
100% hardware bridge converter to support PC, MAC
and Linux environment
|
|
|
 |
ST-106 |
IDE
Device Mini Vertical Bridge (for SATA device)
|
|
Supports any type of SATA
device (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk,.)
|
|
|
48 bits LBA can break capacity
limit to support HDD larger than 137GB
|
|
|
Mini board size (75mm x 26mm),
No space wasted |
|
|
 |
ST-305
|
RAID Ultra ATA-133 PCI Host (Silicon Image)
|
|
Add High Performance and Reliable Ultra ATA-133 2 Channels / 4
Devices connection |
|
|
Support RAID 0, RAID 1, RAID 0+1 on your PC system to
support all types of ATAPI,
ATA/133, ATA/100, ATA/66, ATA/33, EIDE ,IDE storage devices and HDD larger than
137GB |
|
|
PCI Card |
|
|
Supports Plug and Play
specification |
|
|
|
|
ST-307 |
IDE – CF Bridge (Connector Mode)
|
|
40 pin IDE standard Port
|
|
|
Support CompactFlash cards (Type I & II) or a IBM
Microdrive |
|
|
The CF card can be the primary boot device containing
the OS and application. Transparent to the operating system and does not
require any drivers |
|
|
 |
ST-307P4
|
IDE44 – CF
Bridge (Connector Mode)
|
|
44 pin IDE standard Port |
|
|
Supports IDE Master and Slave mode
|
|
|
Support CompactFlash cards (Type I & II) or a IBM
Microdrive |
|
|
The CF card can be the primary bootable device
containing the OS and application
|
|
|
 |
ST-307P4M |
CF
---> 2.5” IDE HDD Bridge Board
|
|
Convert CF to slim
line 2.5 inch IDE HDD ! |
|
|
44 pin IDE male connector on board
|
|
|
Supports IDE Master and Slave
|
|
|
The CF card can be the primary bootable device
containing the OS and application
|
|
|
 |
ST-308 |
IDE – CF
Bridge (Internal Use)
|
|
Supports 40 pin & 44 pin IDE standard Port both |
|
|
Support Compact Flash cards (Type I & II) or a
IBM Microdrive |
|
|
The CF card can be the primary bootable device
containing the OS and application
|
|
|
Supports jumper for master and slave setting
|
|
|
 |
ST-308B |
IDE – CF Bridge (Bracket Mode)
|
|
Supports 40 pin & 44 pin IDE standard Port both
|
|
|
Support Compact Flash cards (Type I & II) or a
IBM Microdrive |
|
|
Supports jumper for master and slave setting
|
|
|
The CF card can be the primary bootable device
containing the OS and application
|
|
|
 |
ST-308F |
IDE – CF Bridge (Front Mode)
|
|
Supports 40 pin & 44 pin IDE standard Port both
|
|
|
Support Compact Flash cards (Type I & II) or a
IBM Microdrive |
|
|
Supports jumper for master and slave setting
|
|
|
The CF card can be the primary bootable device
containing the OS and application
|
|
|
 |
ST-309
|
USB2.0 Device
Mini Vertical Bridge (for IDE device)
|
|
Attaches to all types of ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE
storage devices (Mobile Rack, DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk,
….) |
|
|
USB2.0 High
transfer rate of 480Mbps
|
|
|
Have USB Type
B upstream connector and USB 5Pin Pin header both on board
|
|
|
 |
ST-317P4M |
Duo Compact Flash 2.5” IDE HDD Bridge Board
|
|
Convert two CF to slim line 2.5 inch
IDE Low Power Hard Drive! |
|
|
44 pin IDE male connector on board
|
|
|
Support CompactFlash cards (Type I)
|
|
|
The CF card can be the primary bootable device
containing the OS and application.
|
|
|
 |
U2IDESATAJ |
USB 2.0 to SATA and IDE
cable
|
|
Compliance with Gen1i of Serial ATA II Electrical
Specification 1.0 |
|
|
Support SATA Spread-Spectrum Clock
|
|
|
Compliance with USB 2.0 electrical specification |
|
|
ATA/ATAPI PACKET command set |
|
|
 |
UB-102PC
|
2Bay IDEx2
Enclosure Board for PC Case (to USB2.0 Host)
|
|
Control and Convert 2 internal IDE hard drive to USB 2.0 |
|
|
Supports PCI bracket and uses dominant PC Case as MultiBay Storage
System |
|
|
USB2.0 B-Type upstream connector supports High
transfer rate of 480Mbps |
|
|
 |
UB-104PC
|
4Bay IDEx4
Enclosure Board for PC Case (to USB2.0 Host)
|
|
Control and Convert 4 internal IDE hard drive to USB 2.0 host.
|
|
|
USB2.0 B-Type connector supports High transfer rate of 480Mbps
|
|
|
Supports three operation modes: 4Disks, 2Disks, 1Disk (BigDrive)
|
|
|
