| |
P/N |
Product
Description |
|
 |
EX-9132C-2-DIO
|
2-port Serial-to-Ethernet Converter with Digital I/O
 |
CPU: 32-bits ARM-Cortex-M3
CPU , 50 MHz (Max) |
|
|
RAM: 32 K Bytes SRAM |
|
|
ROM: 96 K Bytes Flash ROM |
|
|
Ethernet port 10 /100 M bps
( Auto Detecting ) |
|
|
Two serial ports - Port
RS-232 x 1 Port (DB9) , RS-232/422/485 x 1 Port ( Auto Detect ) |
|
|
Digital I/O - 2 Digital
input and two digital outputs (relay) |
|
|
 |
EX-9486-2L-8
|
Linux Embedded System with 8 Serial Ports
|
|
Operating system Linux
|
|
|
ARM9200 at 180MHz, Memory
Management Unit |
|
|
Two 10/100 Mbps Ethernet |
|
|
Three USB 2.0 Host/Client
Ports |
|
|
8 Serial Ports
RS-232/422/485 |
|
|
24 digital Input/Output selected by
switch |
|
|
Multimedia Card Interface
for SD memory card |
|
|
 |
EX-9486-2L-DIO
|
Linux Embedded System with DIO points
|
|
Operating system Linux
|
|
|
ARM920T ARM Thumb Processor
with 200MIPS at 180MHz, Memory Management Unit |
|
|
Two 10/100 Mbps Ethernet |
|
|
Two USB 2.0 full speed (12
Mbps) Host Ports |
|
|
Multimedia Card Interface
for SD memory card |
|
|
One RS-485, One RS-232 and
One serial console port |
|
|
16 opto-isolated digital
inputs, 8 Darlington-pair digital outputs |
|
|
 |
EX-9486-4L-4
|
Linux Embedded System with 4 Serial Ports
|
|
100% Linux Compatible ,
Hassle Free |
|
|
Support Wire and Wireless
Networking |
|
|
Four Speed TTYs (Serial
Interface) |
|
|
Twenty-one TTL-level GPIOs |
|
|
Optional 4GB SD Card for
Data Storage |
|
|
GNU Tool Chain for
Application Development |
|
|
 |
EX-9486-L
|
Linux Panel Box Monitor, ATMEL 180MHz, 32MB SDRAM, Flash
up to 64MB, EEPROM 2kB
|
|
Operating system Linux
|
|
|
ARM9 180mhz CPU
|
|
|
Up to 64 Mb Flash memory |
|
|
Reset function
|
|
|
LED indicators (Power, System Ready,
Ethernet, Serial Ports) |
|
|
CD-ROM support
|
|
|
Solid casing |
|
|
|
|
RCE-1
|
Remote contact
extender open
|
|
Allows the user to monitor contact status
at one location, and send these signals to a remote
location |
|
|
There are two units supplied, a master
unit and a slave unit |
|
|
System is bi-directional |
|
|
|
|
RCE-1E
|
Remote contact
extender enclosed
|
|
Allows the user to monitor contact status
at one location, and send these signals to a remote
location |
|
|
There are two units supplied, a master
unit and a slave unit |
|
|
System is bi-directional |
|
|
