| |
P/N |
Product
Description |
|
 |
(multiple P/N's - please open Feature & Specification page to
find P/N's)
|
USB2.0 Device Server
 |
Allows
USB Devices to be used and shared over LAN (LAN and WAN for the
USBN-500NAS) |
 |
Optional USBN-500NAS- allows USB storage to act as a NAS
(Network Attached Storage)
|
 |
Supports wide variety of USB devices
|
 |
Compatible with bulk, interrupt and isochronous type USB devices
|
 |
Supports printing to USB printer from both Wired and Wireless
Interface (USB device port only)
|
 |
Supports printer auto-reconnect while sharing the printer to
different Client PC's (USB device port only)
|
 |
Supports auto sharing of USB devices
|
 |
Supports USB device safe removal
|
 |
User-Friendly application interface
|
 |
Over
current protection
|
|
|
|

|
NW-101 |
USB Device Extender & Shared Over CAT5 RJ-45 GigaLAN
 |
Up to 30MB/s fast transfer rate on
storage accessing |
 |
Make PC to access a long distance USB2.0
or USB1.1 device up to 100 meter CAT5 cable |
 |
Let an USB device be shared by every PC
in office or home through LAN HUB
|
 |
Support Gigabit Ethernet (10/100/1000
Mbps) |
 |
10/100 or 10/100/1000 auto sensing (Auto-MDIX
capable) |
 |
RJ-45 Port offer high speed transmission
over CAT 5 UTP cable
|
 |
Supports an USB Device such as Printer,
Scanner, DV, DSC, Cell Phone, Hard Drive, Card Reader, DVD RW, MP3,
Flash Drive, Floppy, Audio, Phone, Display, Webcam, Mice, Keyboard,
Joystick |
|
|
 |
USB2-100TX |
USB to 10/100
Ethernet Interface
 |
Provides access to any Ethernet or Fast Ethernet network through
your computer USB port |
 |
Hot Swappable: Fully support USB
Plug & Play |
 |
Support by USB Bus power |
 |
Support - Win98, ME, 2000 &
XP, Vista,
Linux operating systems |
|
|
|

|
USB-CAN |
1 port USB to
CAN Bus Adapter
 |
Connects a PC via USB to CAN Bus
|
 |
Supports CAN 2.0A and CAN 2.0B
|
 |
CAN High Speed up to 1MBit/s
|
 |
USB2.0 Full Speed |
 |
Powered by USB
|
 |
Driver emulates serial port for easy access |
 |
Remote Frame support
|
 |
Listen only mode
|
 |
Library (DLL) for standard access
|
 |
ASCII conversion protocol via serial port
|
 |
Support in Windows 2000/XP/2003/Vista,
|
 |
Support in Linux kernel 2.4.32+
|
 |
Metal case |
|
|
 |
USB-CANmodul1 |
Low cost CAN USB Adapter
 |
High-speed CAN interface according to ISO 11898-2 |
 |
Time-stamped CAN messages |
 |
Supports 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active)
identifiers |
 |
Works with USB2.0 hubs |
 |
Up to 64 USB-CANmodul devices can be connected via
standard USB hubs for simultaneous use on a single PC
|
 |
Configuration tool for managing multiple USB-CANmodul
devices |
 |
Device drivers & Software available for Windows® 7/Vista/XP (32/64
bit), Windows® 2000, Linux, WinCE 5.0, WinCE 6.0
|
|
|
 |
USB-CANmodul2 |
Two ports CAN USB Adapter
 |
2 High-speed CAN interfaces (standard version) |
 |
Low-speed and single-wire CAN interfaces optionally
available |
 |
Time-stamped CAN messages |
 |
Works with USB2.0 hubs
|
 |
Up to 128 CAN-channels can be used simultaneously on the
same PC |
 |
Device drivers & Software available for Windows® 7/Vista/XP (32/64
bit), Windows® 2000, WinCE 5.0, WinCE 6.0
|
|
|
 |
USB-CANmodul2 - IP65 |
Two ports CAN USB Adapter
 |
IP65 metal housing wall-mountable
|
 |
2 high-speed CAN interfaces
|
 |
Time-stamped CAN messages |
 |
Works with USB2.0 hubs
|
 |
Up to 128 CAN-channels can be used simultaneously on the
same PC |
 |
Device drivers available for Windows® 7/Vista/XP (32/64
bit), Windows® 2000, WinCE 5.0, WinCE 6.0 |
|
|
 |
USB-CANmodul8 |
USB CAN Gateway with 8 CAN-channel support
 |
8 high-speed CAN interfaces according to ISO 11898-2,
galvanic isolated |
 |
Time-stamped CAN messages
|
 |
Supports 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active)
identifiers |
 |
Simultaneous use of up to 8 USB-CANmodul8 devices on a
single PC, providing access to up to 64 CAN-channels |
 |
Device drivers & software available for Windows® 7/Vista/XP (32/64
bit), Windows® 2000, WinCE 5.0, WinCE 6.0 |
|
|