| |
P/N |
Product
Description |
|
|
|
DIO-3216B |
32-channel
Digital I/O Card for 16 DI and
16 DO Photo-coupler isolated PCI card
 |
16 isolated DI and
16 isolated DO channels |
|
|
High voltage isolation on
all isolated channel (2500 VAC) |
|
|
Programmable digital
filter at 100Hz,200Hz,1KHz,no debounce for input
|
|
|
No output transition
during start-up |
|
|
Output status read back |
|
|
External triggered
interrupt (on IN00~IN07) |
|
|
Keep output state after
hot reset (jumper selectable) |
|
|
Software key function |
|
|
 |
DIO-3232
|
64-channel
Digital I/O Card for 32 DI and 32 DO Photo-coupler isolated
PCI card
|
|
32
isolated DI and 32 isolated DO channels |
|
|
No
output transition during start-up |
|
|
High voltage isolation on all isolated channel (2500 Vac)
|
|
|
DIN
rail wiring board with different output options
|
|
|
Software key function
|
|
|
Output status read back
|
|
|
External triggered interrupt (on IN0,IN1) |
|
|
 |
DIO-3248
|
64-channel
Digital I/O Card for 48 DI and 16 DO Photo-coupler isolated PCI card
|
|
State transition interrupt at DI0 - DI31 |
|
|
No
output transition during start-up
|
|
|
48
isolated DI and 16 isolated DO channels |
|
|
High voltage isolation on all isolated channel (2500 Vac)
|
|
|
DIN
rail wiring board with different output options |
|
|
Output status read back
|
|
|
External triggered interrupt (on IN0,IN1) |
|
|
Software key function |
|
|
 |
DIO-3264
|
64-channel
Digital Input Card for 64 Photo-coupler isolated DI PCI card
|
|
64
isolated DI channels |
|
|
High voltage isolation on all isolated channel (2500 VAC)
|
|
|
Software key function |
|
|
External triggered interrupt (on IN0, IN1) |
|
|
Supports DIN rail mounted wiring board |
|
|
 |
DIO-3208A
|
16-channel Digital I/O
Card for 8 Photo-coupler isolated DI and 8 Relay DO
|
|
 |
AIO-3310
|
8
Channel Analog Input Card
|
|
 |
AIO-3311
|
16
Channel Analog Input Card
|
|
16 channel 12bit analog
inputs (standard:8 channels)
|
|
|
Software selectable input
range : -10V~ +10V, -5V~ +5V , 0~10V, 0~5V
|
|
|
Factory pre-calibrated
analog conversion accuracy
|
|
|
2 byte-wide programmable
TTL I/O |
|
|
DIO00, DIO01 as
trigger/counter in, DIO10,DIO11 as trigger out of timer/counter
function |
|
|
Two 32bit multifunction
counters up to 8MHz |
|
|
Multi-function
: programmable one-shot; square wave generator ; event counter; PWM
generator |
|
|
Software key function
|
|
|
 |
AIO-3312
|
24
Channel Analog Input Card
|
|
24 channel 12bit analog
inputs (standard:8 channels)
|
|
|
Software selectable input
range : -10V~ +10V, -5V~ +5V , 0~10V, 0~5V
|
|
|
Factory pre-calibrated
analog conversion accuracy
|
|
|
2 byte-wide programmable
TTL I/O |
|
|
DIO00, DIO01 as
trigger/counter in, DIO10,DIO11 as trigger out of timer/counter
function |
|
|
Two 32bit multifunction
counters up to 8MHz |
|
|
Multi-function
: programmable one-shot; square wave generator ; event counter; PWM
generator |
|
|
Software key function
|
|
|
 |
AIO-3320
|
Isolated Analog I/O and Digital I/O Card
|
|
Isolated 8 channel 12bit
analog inputs |
|
|
Software selectable input
range : -10V~ +10V, -5V~ +5V , 0~10V, 0~5V
|
|
|
Isolated 8 channel 16bit
analog output |
|
|
8 isolated digital input |
|
|
8 isolated digital output |
|
|
IN0, IN1
as trigger/counter in, OUT0,OUT1 as trigger out of timer/counter
function |
|
|
Two 32bit multifunction
counters with 4/33 MHz multi-clock input |
|
|
Multi-function
: programmable one-shot ; square wave generator ; event counter ;
PWM generator |
|
|
Software key function
|
|
|
 |
AIO-3321
|
Isolated Analog I/O and Digital I/O Card
|
|
Isolated 8
channel 12bit analog inputs
|
|
|
Software
selectable input range : -10V~ +10V, -5V~ +5V , 0~10V, 0~5V
|
|
|
Isolated
16 channel 16bit analog output |
|
|
8 isolated
digital input |
|
|
8 isolated
digital output |
|
|
IN0,
IN1 as trigger/counter in, OUT0,OUT1 as trigger out of timer/counter
function |
|
|
Two 32bit
multifunction counters with 4/33 MHz multi-clock input |
|
|
Multi-function : programmable one-shot ; square wave generator ;
event counter ; PWM generator |
|
|
Software
key function
|
|
|
|
|
AIO-3322
|
Isolated Analog I/O and Digital I/O Card (with trigged data acquisition)
|
|
Isolated 8 channel 12bit analog inputs |
|
|
Software selectable input range : -10V~ +10V, -5V~ +5V , 0~10V,
0~5V |
|
|
Isolated 8 channel 16bit analog output |
|
|
8 isolated digital input |
|
|
8 isolated digital output |
|
|
IN0, IN1 as trigger/counter in, OUT0,OUT1 as trigger out of
timer/counter function |
|
|
Two 32bit multifunction counters with 4/33 MHz multi-clock input |
|
|
Multi-function : programmable one-shot ; square wave generator ;
event counter ; PWM generator |
|
|
Auto data acquisition mode : buffer up to 1024, 3 trigger mode :
analog ;digital ;software, Start event trigger out and complete
trigger out available, Sampling rate : 110K ,10K , 1K , 100HZ
|
|
|
|
|
AIO-3323
|
Isolated Analog I/O and Digital I/O Card (with trigged data acquisition)
|
|
Isolated 8 channel 12bit analog inputs |
|
|
Software selectable input range : -10V~ +10V, -5V~ +5V , 0~10V,
0~5V |
|
|
Isolated 16 channel 16bit analog output |
|
|
8 isolated digital input |
|
|
IN0, IN1 as trigger/counter in, OUT0,OUT1 as trigger out of
timer/counter function |
|
|
Two 32bit multifunction counters with 4/33 MHz multi-clock input |
|
|
Multi-function : programmable one-shot ; square wave generator ;
event counter ; PWM generator |
|
|
Auto data acquisition mode : buffer up to 1024, 3 trigger mode :
analog ;digital ;software, Start event trigger out and complete
trigger out available, Sampling rate : 110K ,10K , 1K , 100HZ
|
|
|
 |
AIO-3382 |
Analog I/O Card, 8 AI 2 AO, 16 TTL , 2 multi-
function timer/counter card
(include bracket kit for TTL I/O )
|
|
8 channel 12bit differential or single-end analog inputs
|
|
|
Software selectable input range : -10V~ +10V, -5V~ +5V , 0~10V,
0~5V |
|
|
Hardware selectable input: 0~20mA, 4~20mA
|
|
|
2 channel 16bit analog output
|
|
|
Option add-on module for 0~20mA, 4~20mA sink or source output
(AIO-3382A/B) |
|
|
2 byte configurable TTL I/O |
|
|
IO00, IO01 as trigger/counter in, IO10,IO11 as trigger out of
timer/counter function
|
|
|
Two 32bit multifunction counters with 4/33 MHz multi-clock input |
|
|
Multi-function : programmable one-shot ; square wave generator ;
event counter ; PWM generator |
|
|
Software key function
|
|
|
|
|
AIO-3382A |
Analog I/O Card, 8 AI 2 AO, 16 TTL , 2 multi-
function timer/counter card(2 current source AO) (include
bracket kit for TTL I/O )
|
|
8 channel 12bit differential or single-end analog inputs
|
|
|
Software selectable input range : -10V~ +10V, -5V~ +5V , 0~10V,
0~5V |
|
|
Hardware selectable input: 0~20mA, 4~20mA
|
|
|
2 channel 16bit analog output
|
|
|
Option add-on module for 0~20mA, 4~20mA sink or source output
(AIO-3382A/B) |
|
|
2 byte configurable TTL I/O |
|
|
IO00, IO01 as trigger/counter in, IO10,IO11 as trigger out of
timer/counter function
|
|
|
Two 32bit multifunction counters with 4/33 MHz multi-clock input |
|
|
Multi-function : programmable one-shot ; square wave generator ;
event counter ; PWM generator |
|
|
Software key function
|
|
|
|
|
AIO-3382B |
Analog I/O Card, 8 AI 2 AO, 16 TTL , 2 multi-
function timer/counter card(2 current sink AO) (include
bracket kit for TTL I/O )
|
|
8 channel 12bit differential or single-end analog inputs
|
|
|
Software selectable input range : -10V~ +10V, -5V~ +5V , 0~10V,
0~5V |
|
|
Hardware selectable input: 0~20mA, 4~20mA
|
|
|
2 channel 16bit analog output
|
|
|
Option add-on module for 0~20mA, 4~20mA sink or source output
(AIO-3382A/B) |
|
|
2 byte configurable TTL I/O |
|
|
IO00, IO01 as trigger/counter in, IO10,IO11 as trigger out of
timer/counter function
|
|
|
Two 32bit multifunction counters with 4/33 MHz multi-clock input |
|
|
Multi-function : programmable one-shot ; square wave generator ;
event counter ; PWM generator |
|
|
Software key function
|
|
|
 |
AIO-3384 |
Analog I/O Card, 8 AI 4 AO, 16 TTL , 2 multi-function timer/counter card
(include bracket kit for TTL I/O )
|
|
8 channel 12bit differential or single-end analog inputs
|
|
|
Software selectable input range : -10V~ +10V, -5V~ +5V , 0~10V,
0~5V |
|
|
Hardware selectable input: 0~20mA, 4~20mA
|
|
|
4 channel 16bit analog output
|
|
|
Option add-on module for 0~20mA, 4~20mA sink or source output
(AIO-3382A/B) |
|
|
2 byte configurable TTL I/O |
|
|
IO00, IO01 as trigger/counter in, IO10,IO11 as trigger out of
timer/counter function
|
|
|
Two 32bit multifunction counters with 4/33 MHz multi-clock input |
|
|
Multi-function : programmable one-shot ; square wave generator ;
event counter ; PWM generator |
|
|
Software key function
|
|
|
|
|
AIO-3384AA |
Analog I/O Card, 8 AI 4 AO, 16 TTL , 2 multi- function timer/counter card (4
current source AO)
(include bracket kit for TTL I/O )
|
|
8 channel 12bit differential or single-end analog inputs
|
|
|
Software selectable input range : -10V~ +10V, -5V~ +5V , 0~10V,
0~5V |
|
|
Hardware selectable input: 0~20mA, 4~20mA
|
|
|
4 channel 16bit analog output
|
|
|
Option add-on module for 0~20mA, 4~20mA sink or source output
(AIO-3382A/B) |
|
|
2 byte configurable TTL I/O |
|
|
IO00, IO01 as trigger/counter in, IO10,IO11 as trigger out of
timer/counter function
|
|
|
Two 32bit multifunction counters with 4/33 MHz multi-clock input |
|
|
Multi-function : programmable one-shot ; square wave generator ;
event counter ; PWM generator |
|
|
Software key function
|
|
|
|
|
AIO-3384AB |
Analog I/O Card, 8 AI 4 AO, 16 TTL , 2 multi-function timer/counter card (2
current source AO , 2 current sink AO)
(include bracket kit for TTL I/O )
|
|
8 channel 12bit differential or single-end analog inputs
|
|
|
Software selectable input range : -10V~ +10V, -5V~ +5V , 0~10V,
0~5V |
|
|
Hardware selectable input: 0~20mA, 4~20mA
|
|
|
4 channel 16bit analog output
|
|
|
Option add-on module for 0~20mA, 4~20mA sink or source output
(AIO-3382A/B) |
|
|
2 byte configurable TTL I/O |
|
|
IO00, IO01 as trigger/counter in, IO10,IO11 as trigger out of
timer/counter function
|
|
|
Two 32bit multifunction counters with 4/33 MHz multi-clock input |
|
|
Multi-function : programmable one-shot ; square wave generator ;
event counter ; PWM generator |
|
|
Software key function
|
|
|
|
|
AIO-3384BB |
Analog I/O Card, 8 AI 4 AO, 16 TTL , 2 multi-function timer/counter card (4
current sink AO)
(include bracket kit for TTL I/O )
|
|
8 channel 12bit differential or single-end analog inputs
|
|
|
Software selectable input range : -10V~ +10V, -5V~ +5V , 0~10V,
0~5V |
|
|
Hardware selectable input: 0~20mA, 4~20mA
|
|
|
4 channel 16bit analog output
|
|
|
Option add-on module for 0~20mA, 4~20mA sink or source output
(AIO-3382A/B) |
|
|
2 byte configurable TTL I/O |
|
|
IO00, IO01 as trigger/counter in, IO10,IO11 as trigger out of
timer/counter function
|
|
|
Two 32bit multifunction counters with 4/33 MHz multi-clock input |
|
|
Multi-function : programmable one-shot ; square wave generator ;
event counter ; PWM generator |
|
|
Software key function
|
|
|
Back to Top
|
