All products names and registered and unregistered trademarks mentioned are for identification purposes only and remain the exclusive property of their respective owners. Please see our disclaimer information.

Copyright © 1999 - 2020 Papyrus Computer Technologies Ltd. All rights reserved, Last updates of pages or web October 29, 2017  Best View Microsoft I.E 5.0 or later, Google Chrome, Mozilla Firefox, Edge 1024x768 Screen Mode

Papyrus Computer Technologies Ltd.

English / Hebrew

Dediprog SF600Plus is high speed "in System Programming" programmer to update the SPI Flash soldered on board (In Circuit Programming) or in the socket adaptor (Offline programming). The programmer is easily controlled by the computer DediProg Software through the USB bus offering a friendly interface and powerful features to users.

SF600Plus combines the advantages of SF100 with additional improvements: High-speed USB and higher SPI performances.

SF600Plus is an upgrade version of SF600. The main difference is that SF600Plus embeds an 8GB memory, which allows standalone programming.


Highlights


High performance (25MHz, Single IO) *





















*Please note the programming and verify time will depend on different IC type; please refer to the IC specification before programming.


Hardware

SF600Plus is designed with ISP header, through an appropriate connector, users can connect the programmer and drive the SPI signals, supply the memory and control the controller or application status. Please refer to Table 1 for the SF600Plus 2x10 header pin out. DediProg also provides the SF600Plus ISP Cable which is used to connect the programmer to the 2X6 2.54mm ISP Pin Header on board, please refer to Table 2 for the SF600PlusISP Cable 2x6 pin out.



Table 1: SF600 ISP Header Pin Out (2x10)
























Table 2: ISP Cable Connector Pin Out (2x6)


















The SF600 USB software tool chain offers high flexibility and fits the different and highest requirements:

























Hardware Requirement for ISP

To have a clear understanding on the different ISP or backup boot methods and different reference schematics, please download our dedicated application notes: AN0103 and AN0106


Standard Package

 

Optional Purchase

SPI Flash IC Programmer


Model: SF600Plus

Contact Us

USB Mode

Reference IC

Density

 (Program + Verify)

Memory size

W25X80VSSIG

8Mb

9s


W25Q16VSSIG

16Mb

11.6s


W25Q32VSSIG

32Mb

12.6s


W25Q64FVSSIG

64Mb

31s


W25Q128BVFIG

128Mb

61.7s


W25Q256FVFIG

256Mb

89.2s


S25FL512SAGMFI011

512Mb

147.4s

1

Vpp

CS2

2

3

CS1

Vcc

4

5

MISO/DQ1

Hold/DQ3

6

7

Wp/DQ2

CLK

8

9

GND

MOSI/DQ0

10

11

NC

Reset/IO3

12

13

NC

NC

14

15

NC

NC

16

17

NC

NC

18

19

GPIO1

GPIO2

20

1

Vpp

CS2

2

3

CS1

Vcc

4

5

MISO/DQ1

Hold/DQ3

6

7

Wp/DQ2

CLK

8

9

GND

MOSI/DQ0

10

11

NC

Reset

12

                      Engineering Mode










For engineers and expert to access advanced features for development, repairing etc.


              Production Mode









For operators in production to control multiple programmers and improve the throughput.

                   Command Line









Customer software can control multiple SF100 programmers by command line interface.


Production mode