| |
P/N
|
Product Description |
|
 |
(multiple P/N's - please open Feature & Specification page to
find P/N's) |
High speed USB2.0 Serial Adapters
(external)
 |
USB
2.0 based reliable Serial Adapters, 2, 4
or 8 independent ports, Surge
suppression available
|
|
|
USB to
RS-232 or USB RS-232/422/485 (MEI) available
|
|
|
On 400
models, each port configurable for RS-232, RS-422 or RS-485. |
|
|
Auto
detect between RS-485 and RS-422
|
|
|
Bus
powered, no external power required
|
|
|
Windows 2000/XP/Vista and Linux
|
|
|
|
|
(multiple P/N's - please open Feature & Specification page to
find P/N's) |
Embedded USB Serial Adapters (high
speed USB2.0)
|
|
USB
2.0 based reliable Serial Adapters, 1, 4
or 8 independent ports, Surge
suppression available
|
|
|
USB to
RS-232 or USB RS-232/422/485 (MEI) available
|
|
|
On 400
models, each port configurable for RS-232, RS-422 or RS-485. |
|
|
Auto
detect between RS-485 and RS-422
|
|
|
Bus
powered, no external power required
|
|
|
Windows 2000/XP/Vista and Linux
|
|
|
|
|
HXSP-2108F
|
USB
2.0 To RS-485 Converter
|
|
USB
specification revision 1.1 & 2.0 compliant. |
|
|
Small volume, easy installation |
|
|
No power supply needed. |
|
|
Auto sense serial signal rate, zero delay
automatic transmit |
|
|
Baud rate: 300~115200bps, automatic sense
serial signal rate |
|
|
Transmit distance reach up to 1800M at
the rate of 9.6kbps |
|
|
Protection: 600W surge protection, 15KV
static electricity protection |
|
|
Connector: USB side type A interface
female, RS-485 side DB-9 male or 6 terminal block |
|
|
Working temperature: -20 to 60 centigrade |
|
|
Prolific PL-2303 Chipset |
|
|
|
|
HXSP-2108G
|
USB
2.0 To RS-485/RS-422 Converter
|
|
USB
specification revision 1.1 & 2.0 compliant. |
|
|
Small
volume, easy installation |
|
|
No
power supply needed. |
|
|
Auto
sense serial signal rate, zero delay automatic transmit |
|
|
Baud
rate: 300~115200bps, automatic sense serial signal rate |
|
|
Transmit distance reach up to 1800M at the rate of 9.6kbps |
|
|
Protection: 600W surge protection, 15KV static electricity
protection |
|
|
Connector: USB side type A interface female, RS-485/RS-422 side
DB-9 male or 6 terminal block |
|
|
Working temperature: -20 to 60 Celsius |
|
|
Prolific PL-2303 Chipset |
|
|
 |
SSU2-300 |
USB Single Port Adapter
|
|
USB 2.0 based design, uto detect between RS-485 and RS-422
|
|
|
Full-duplex or half-duplex modes
|
|
|
Bus powered, no external power required
|
|
|
15kV ESD immunity, Surge and short circuit protection
|
|
|
Windows 2000/XP/Vista and Linux
|
|
|
 |
SSU2-400I |
USB Single Port Adapter
|
|
USB 2.0 based design
|
|
|
3000V Optical Isolation, 15KV ESD immunity, Surge and short circuit protection
|
|
|
Auto detect between RS-485 and RS-422, Full-duplex or half-duplex modes
|
|
|
Bus powered, no external power required
|
|
|
Windows 2000/XP/Vista and Linux
|
|
|
 |
USB4485
|
USB
to 4 ports RS485/422 converter
|
|
Plug and play compliant, hot swappable |
|
|
Add 1 to 4 serial ports |
|
|
Multi-interface RS-485/22 model |
|
|
USB 2.0, USB 1.0 and 1.1 compliant |
|
|
USB port powered - no external power
needed or 5VDC power supply. |
|
|
 |
USB-COM-PRO
|
USB to 1
RS232/422/485 port adapter
|
|
Metal case
|
|
|
DIN-Rail mountable
|
|
|
RS232/422/485 DB9 male port
|
|
|
Terminal block
|
|
|
Speed up to 3000kbps
|
|
|
No external power supply
|
|
|
 |
USB-COMi |
USB to
RS-422/485 Adapter
|
|
Ports: One RS-422/485 port (DB9 male), Speed up to 921.6kbps,
10KV ESD |
|
|
RS-422/485 signals: RS-422: TxD+/-, RxD+/-, RTS+/-, CTS+/-, GND
RS-485: Data+/-, GND
|
|
|
Power: no external power supply
|
|
|
Driver: Win98, ME, Win2000, XP, Vista, Linux
(Kernel 2.4
and up built-in)
|
|
|
 |
USB-COMi+ |
1-Port RS-232/422/485 USB-to-Serial
Adapter, Easy Mode Setting by Hidden DIP Switch
|
|
Adds one RS-232, RS-422 or RS-485 serial
port by connecting to a USB port |
|
|
No need to open chassis to set operation
modes- upper case can be sliding open for easy RS-232, RS-422, RS-485
mode settings |
|
|
Full RS-232 modem control signals and
hardware/software flow control |
|
|
RS-232 data signals: TxD, RxD, RTS, CTS,
DSR, DTR, DCD, RI, GND |
|
|
RS-422 data signals: TxD-, TxD+, RxD+,
RxD-, GND, RTS-, RTS+, CTS+, CTS- |
|
|
RS-485 4-wire data signals: TxD-, TxD+,
RxD+, RxD- |
|
|
RS-485 2-wire data signals: Data-, Data+ |
|
|
Automatic transmit and receive control
for 2-wire RS-485 half-duplex mode |
|
|
Built-in termination and biasing |
|
|
High speed serial port with baud rates up
to 921.6K bps |
|
|
Serial port protected with surge
protection of 10KV |
|
|
Powered by USB port, no external power
adapter required |
|
|
Supports Windows 7, Vista, 2003, XP, 2000
and Linux |
|
|
|
|
USB-COMi+2 |
1-Port RS-422/485 USB-to-Serial Adapter, Easy
Mode Setting by Hidden DIP Switch
|
|
Adds one RS-422 or RS-485 serial port by
connecting to a USB port |
|
|
No need to open chassis to set operation
modes- upper case can be sliding open for easy RS-422, RS-485 mode
settings |
|
|
RS-422 data signals: TxD-, TxD+, RxD+,
RxD-, GND, RTS-, RTS+, CTS+, CTS- |
|
|
RS-485 4-wire data signals: TxD-, TxD+,
RxD+, RxD- |
|
|
RS-485 2-wire data signals: Data-, Data+ |
|
|
Automatic transmit and receive control
for 2-wire RS-485 half-duplex mode |
|
|
High speed serial port with baud rates up
to 921.6K bps |
|
|
Serial port protected with surge
protection of 10KV, Built-in termination and biasing |
|
|
Powered by USB port, no external power
adapter required |
|
|
Supports Windows 7, Vista, 2003, XP, 2000
and Linux |
|
|
 |
USB-COMi-M
|
USB to
RS-232/422/485
Industrial Adapter
|
|
Ports:
One RS-232/422/485 port |
|
|
Speed: up to 921.6kbps |
|
|
RS-232 signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
|
|
RS-422/485 signals: RS-422 TxD+/-,
RxD+/-, RTS+/-, CTS+/-, GND: RS-485 Data+/-, GND |
|
|
Power:
USB bus powered, no external power supply |
|
|
Driver: Win98, ME, Win2000, XP, Linux (Kernel 2.4
and up built-in) |
|
|
Connectors:
One DB9 male and terminal block |
|
|
DIN-Rail mountable, Metal Case |
|
|
 |
USB-COMi-SI
|
USB to
RS-422/485 Adapter with surge protection and optical isolation
|
|
Ports: One RS-422/485 port (DB9 male), Speed up to 921.6kbps,
25KV ESD |
|
|
RS-422/485 signals: RS-422: TxD+/-, RxD+/-, RTS+/-, CTS+/-, GND
RS-485: Data+/-, GND
|
|
|
Power: no external power supply
|
|
|
Driver: Win98, ME, Win2000, XP, Vista, Linux
(Kernel 2.4
and up built-in)
|
|
|
|
|
USB-COMi-SI-M |
USB to RS-422/485 Industrial and Isolated
Adapter
|
|
Ports: One RS-422/485 port,
Optically Isolated |
|
|
Speed: up to 921.6kbps |
|
|
RS-232 signals: TxD, RxD, RTS,
CTS, DTR, DSR, DCD, GND |
|
|
RS-422/485 signals: RS-422 TxD+/-,
RxD+/-, RTS+/-, CTS+/-, GND: RS-485 Data+/-, GND |
|
|
Power: USB bus powered, no
external power supply |
|
|
Driver: Win98, ME, Win2000,
XP, Linux (Kernel 2.4 and up built-in) |
|
|
Connectors: One DB9 male and
terminal block |
|
|
DIN-Rail mountable, Metal
Case |
|
|
 |
USB-COMi-TB
|
Hi-Speed USB to Industrial Single RS-422/485 Adapter
|
|
RS422/485 Terminal Block
|
|
|
Speed up to 921.6kbps
|
|
|
No external power supply
|
|
|
|
|
USB-2COMI-M
|
USB to 2 RS422/485 ports adapter
|
|
Metal case
|
|
|
DIN-Rail mountable
|
|
|
2 RS422/485 DB9 male ports
|
|
|
Terminal block
|
|
|
Speed up to 921.6kbps
|
|
|
No external power supply
|
|
|
 |
USB2-2COM-PRO
|
USB to 2
RS232/422/485 port adapter
|
|
Metal case
|
|
|
DIN-Rail mountable
|
|
|
RS232/422/485 DB9 male port
|
|
|
Terminal block
|
|
|
Speed up to 3000kbps
|
|
|
No external power supply
|
|
|
 |
USB-4COMI-M
|
USB to 4 RS422/485 ports adapter
|
|
Metal case
|
|
|
DIN-Rail mountable
|
|
|
4 RS422/485 DB9 male ports
|
|
|
Speed up to 921.6kbps
|
|
|
No external power supply
|
|
|
 |
USB2-4COMi-M-CBL
|
4-Port
RS-232/422/485 USB-to-Serial Adapter, Compact Metal Case with Extension Cable,
DIN rail
|
|
Adds four industrial RS-232, RS-422 or
RS-485 serial ports by connecting to a USB port
|
|
|
Compact size box can be mounted to DIN
rail conveniently |
|
|
Extension spider cable with DB37
connector to 4 DB9 serial ports |
|
|
SECC metal chassis with DIN rail bracket |
|
|
Automatic transmit and receive control
for 2-wire RS-485 half-duplex mode |
|
|
Termination resistors and biasing
resistors built on board |
|
|
Operation Modes: RS-232; Standard RS-232
Mode, RS-422; 4-wire with handshaking, RS-485; 4-wire full duplex,
RS-485; 2-wire half duplex with echo, RS-485; 2-wire half duplex without
echo |
|
|
High speed serial port with baud rates up
to 921.6K bps |
|
|
Serial port protected with surge
protection of 10KV |
|
|
Powered by USB port, no external power
adapter required |
|
|
Supports Windows 7, Vista, 2003, XP, 2000
and Linux |
|
|
 |
USB2 4COM PRO
|
USB to 4
RS232/422/485 port adapter
|
|
Metal case
|
|
|
DIN-Rail mountable
|
|
|
RS232/422/485 DB9 male port
|
|
|
Terminal block
|
|
|
Speed up to 3000kbps
|
|
|
No external power supply
|
|
|
 |
USB-4COMi-SI-M
|
USB to 4
RS232/422/485 port adapter
|
|
Ports:
Four RS-422/485 port, Optically Isolated
|
|
|
Speed: up to 921.6kbps
|
|
|
RS-422/485 signals: RS-422 TxD+/-,
RxD+/-, RTS+/-, CTS+/-, GND: RS-485 Data+/-, GND |
|
|
Power:
External power supply
|
|
|
Driver: Win98, ME, Win2000, XP,
Vista, Linux (Kernel 2.4
and up built-in) |
|
|
Connectors:
Four DB9 male and terminal block
|
|
|
DIN-Rail mountable, Metal Case |
|
|
 |
UTS-M12
|
USB to RS-422/485 2-Ports Adapter
|
|
Fully Compliant with USB Specification
1.1 & 2.0 |
|
|
Provides two (2) DB-9 Male Serial Port
for Device Connection |
|
|
Supports Data Transfer Rate of up to 3
Mbps |
|
|
Supports Remote Wake-Up and Power
Management |
|
|
Supports Hot-Swapping for a Quick Switch
in Serial Devices without Shutting Down your PC |
|
|
Supports Bus Powered Mode |
|
|
 |
UTS-M14
|
USB to RS-422/485 4 Ports Adapter
|
|
Fully Compliant with USB Specification
1.1 & 2.0 |
|
|
Provides four (2) DB-9 Male Serial Port
for Device Connection |
|
|
Supports Data Transfer Rate of up to 3
Mbps |
|
|
Supports Remote Wake-Up and Power
Management |
|
|
Supports Hot-Swapping for a Quick Switch
in Serial Devices without Shutting Down your PC |
|
|
Supports Bus Powered Mode |
|
|
Back to Top
|
