All products names and registered and unregistered trademarks mentioned are for identification purposes only and remain the exclusive property of their respective owners. Please see our disclaimer information.
Copyright © 1999 - 2024 Papyrus Computer Technologies Ltd. All rights reserved, Last updates of pages or web March 25, 2024 Best View Microsoft Edge, I.E 5.0 or later, Google Chrome, Mozilla Firefox 1024x768 Screen Mode
The SER-COMi-SI-M is used to convert RS-232 signals to RS-422/485 signals. The converters provide instant connectivity to RS-422/485 communication devices for factory automation equipment, multi-drop data collection devices, barcode readers, time clocks, scales, data entry terminals, PC to PC long distance communications (up to 1.3KM) and serial communication in harsh environments.
The SER-COMi-SI-M provide an industrial solution for applications requiring single node or multi-drop communications over short and long distances. In RS-485 half-duplex mode, SER-COMi-M and SER-COMi-SI-M also provides automatic data transmit/receive control.
The SER-COMi-SI-M converter is optically isolated with 2000 Volt DC optical isolation. The optical isolation protects your PC from spikes and surges on the RS-422/485 network, by converting the electrical pulse into an optical signal and then changing it back into an electrical pulse. Your computer is well protected, since the surges and spikes cannot cross the optical link. The SER-COMi-SI-M is protected by surge protector to withstand electrostatic discharge and power surges up to 25kV ESD. Surge suppression on all signals prevent from damages caused by lightning or high voltage.
Features:
- Converts an RS-232 port to a high speed RS-422/485 port
- 2000V DC optical isolation for all signals
- DCE/DTE pin assignment can be selected
- SECC metal chassis with DIN rail bracket
- LEDs indicate TxD and RxD for easy port monitoring and diagnosis
- Automatic transmit and receive control for 2-wire RS-485 half-duplex mode
- Built-in termination and biasing
- Serial port protected with surge protection of 25kV
- High speed serial port with baud rate up to 921.6kbps
Specifications:
- Serial Interface
- Input RS-232
- Output RS-422/485
- Number of Ports 1
- Connector
- Input: DB9
- Output: DB9 and 5-pin terminal block
- Max. Speed 921.6kbps for transmit & receive
- RS-422 Signals TxD-, TxD+, RxD+, RxD-, GND, RTS-, RTS+, CTS+, CTS-
- RS-485 Signals (4 wire) TxD-, TxD+, RxD+, RxD-, GND
- RS-485 Signals (2 wire) Data-, Data+, GND
- Protection
- 25kV ESD protection for all signals
- 2000V DC optical isolation for all signals
- Power
- Power Input DC 12V, 1A external power adapter
- Mechanical
- Casing SECC metal chassis with DIN rail bracket
- Environmental
- Operating Temperature 0°C to 55°C (32°F to 131°F)
- Storage Temperature -20°C to 75°C (-4°F to 167°F)
- Operating Humidity 5% to 95% RH
- Safety Approvals CE, FCC
1-Port RS-232 to RS-422/485 Adapter with Metal Case and Optical Isolation
Model: SER-COMi-SI-M
