All products names and registered and unregistered trademarks mentioned are for identification purposes only and remain the exclusive property of their respective owners. Please see our disclaimer information.
Copyright © 1999 - 2024 Papyrus Computer Technologies Ltd. All rights reserved, Last updates of pages or web March 25, 2024 Best View Microsoft Edge, I.E 5.0 or later, Google Chrome, Mozilla Firefox 1024x768 Screen Mode
A Controller Area Network (CAN) is a high-integrity asynchronous serial bus system for networking intelligent devices. It is often used in automotive and industrial systems.The USB-2CAN-M is designed to make a fast, simple way to communicate with CAN bus devices. Connected to a USB port on your computer or USB hub, the USB-2CAN-M instantly adds two industrial CAN bus channel to your host system with easy plug and play (PnP) and hot plug features.
The USB-2CAN-M provides a cost-effective solution for customers to enable communication with CAN bus devices. The solution designed by ARM Cortex-M0 32-bit micro controller and the USB to serial chip makes it very flexible in handling small burst of CAN frames at a high speed.
The USB-2CAN-M provides DC +5V 100mA power for external devices.
Features
- Adds two CAN bus port on your computer by connecting to a port
- Powered by USB port, no external power adapter required
- LEDs indicate initialization and CAN bus status
- Installs as a standard Windows COM port
- Supported CAN modes: Standard, Listen, Echo
- Can be controlled over serial port using ASCII commands
- Easy to use API provided along with sample source codes and GUI sample programs
- Easy plug and play installation and CAN bus device connection
- CAN bus speed up to 1Mbps
- 128 bytes transmit and 384 bytes receive FIFO buffer for high speed data throughput
- Supports CAN 2.0A and CAN 2.0B protocols
- Designed by ARM Cortex-M0 32-bit microcontroller and the USB to UART chip
- Drivers provided for Windows and Linux OS
- Supports SocketCAN (slcan driver) since kernel 2.6.38+
Specifications:
2-Port USB to CAN Bus Adapter with Metal Case and 16KV ESD Protection
Model: USB-2CAN-M
USB Interface |
USB Bus | USB 2.0 Full Speed, USB 1.1 compliant |
Connector | USB type B |
Chipset | ARM Cortex-M0 32-bit microcontroller |
Operating Systems | Windows 2000 up to Windows 10 |
Windows Server 2000 up to 2018 |
Linux kernel 2.6+ |
Mac OS X support available |
Installation | The driver is already installed (Linux), or installs by automatic Download after Device connection (Windows). |
CAN Bus |
CAN Bus Controller | Bosch C_CAN module |
Number of Ports | 2 |
Connector | DB9 male |
5-pin terminal block |
CAN Bus Speed | CAN 2.0A / 2.0B 5kbps to 1Mbps for transmit & receive |
Signals | CAN_H, CAN_L, CAN_GND, CAN_V+ |
CAN Bus Mode | Standard mode: normal operation on CAN bus |
Listen mode: passive receiving of CAN Frames |
Echo mode: transmitter also receives sent frames (for testing purposes) |
LED | CAN bus data activity, CAN bus error |
Protection | +/- 16kV ESD protection for all signals |
Software |
API Library | Supported OS: Windows,Linux Supports C/C++, C#, VB.NET, VB6, Python and LabVIEW |
Utility | On-board firmware update utility |
Linux OS | Supports SocketCAN (slcan driver) since kernel 2.6.38+ |
Monitoring Tools | Supported by CANHacker, Titan CAN Test |
Power Requirement |
Power Input | Power supplied via USB (5V) connector |
No external power needed |
Power Consumption | Max. 300mA@5V DC |
Environmental |
Operating Temperature | 0°C to 60°C (32°F to 140°F) |
Storage Temperature | -20°C to 75°C (-4°F to 167°F) |
Operating Humidity | 5% to 95% RH |
Safety Approvals | CE, FCC |
Mechanical |
Case | SECC sheet metal (1mm) |
Dimensions | 115mm × 85mm × 28mm (L × W × H) Case |
Weight | 310g |