All products names and registered and unregistered trademarks mentioned are for identification purposes only and remain the exclusive property of their respective owners. Please see our disclaimer information.
Copyright © 1999 - 2024 Papyrus Computer Technologies Ltd. All rights reserved, Last updates of pages or web March 25, 2024 Best View Microsoft Edge, I.E 5.0 or later, Google Chrome, Mozilla Firefox 1024x768 Screen Mode
English / Hebrew
The Bracket PCI To PCI-E 1x Riser Card Extender utilizes a PLX Technology PEX 8111 or PEX 8112 PCI to PCI Express bridge chip. It will accept standard or low profile PCI cards. As a generic PCI to PCI Express adapter it should work well with most PCI cards.
This adapter allows you to use your existing PCI cards in the PCI Express slot of your mother board. It can accept one of the half height cards designed for 2U server chassis environments, such as a Firewire or Lan card. The 32bit 33MHz adapter’s 4 pin connector is connected directly to the power supply of your PC. The heat generated by the card is very low. The adapter has a bracket with a large gap to allow you to plug things into the card.
Features
- Easy Plug and Play Installation.
- PCI 32 bit 33Mhz Bus one slot.
- Connects to a standard 5 volt power supply connector.
- Easily fits into standard PC cases.
- PCI Express 1 Lane Port (1 virtual channel), 2.5Gbps per direction.
- Supports PCI 32 bit 33MHz bus one slot.
- PCI-Express Specification Version 1.0 Compliant.
- PCI Specification Version 2.3 Compliant.
- Combination low profile PCI 32 bit host card.
- Dimension: 125mm x 47mm.(bracket 120mm).
- Net Weight: 48g.
Bracket PCI To PCI-E 1x Riser Card Extender
Model: SLPS091
