All products names and registered and unregistered trademarks mentioned are for identification purposes only and remain the exclusive property of their respective owners. Please see our disclaimer information.
Copyright © 1999 - 2024 Papyrus Computer Technologies Ltd. All rights reserved, Last updates of pages or web March 25, 2024 Best View Microsoft Edge, I.E 5.0 or later, Google Chrome, Mozilla Firefox 1024x768 Screen Mode
eSATA II – 3Gbps 4Ports with Raid5, Raid10, Raid0, Raid1, Port Multiplier and NCQ!
RAID 5 (Distributed Parity RAID), JBOD (Just Bunch of Disks), RAID 0 (Striping), RAID 1 (Mirroring) and RAID 0+1 (mirrored-stripping) improve the data performance and provide the data redundancy and rebuilding.
Features:
- Four SATA II ports. Three internals and 1 external eSATA
- Support Raid5, Raid10, Raid0, Raid1, Port Multiplier and NCQ!
- RAID 5 (Distributed Parity RAID), JBOD (Just Bunch of Disks), RAID 0 (Striping), RAID 1 (Mirroring) and RAID 0+1 (mirrored-stripping)
- PCI Card
- Supports Plug and Play specification
- Provides 2 Brackets to Support Low profile PCI and Regular size PCI in one card
Specifications:
- SATA II External Connector (eSATA) on External port
- Provides 2 Brackets to Support Low profile PCI and Regular size PCI in one card
- PCI
- Compliant with PCI Specification, revision 2.3
- Supports 66 MHz PCI with 32-bit data
- Internal application interface multiplexed to 4 ports
- All registers appear in unified memory space
- Full-chip command completion status accessible with single PCI burst access
- I/O port access to register space
- Low Profile PCI form factor
- High Speed Serial ATA
- Fully compliant with Serial ATA 1.0a and Serial ATA II Extensions to Serial ATA 1.0a Specifications revision 1.1
- Hot-plug capability
- Supports Serial ATA Generation 2 transfer rate of 3.0 Gb/s
- Supports SATA II First-party DMA commands for Native Command Queuing (NCQ)
- Supports Serial ATA II Port Multiplier 1.0 Specifications revision 1.1
- Plesiochronous, Single PLL architecture, 1 PLL for 4 ports
- Supports four independent Serial ATA channels
- Independent Link, Transport, data FIFO, command fetch, scatter/gather, and command execution
- 31 Commands and Scatter/Gather Tables per Port
- Supports bootable drive
- Four Pin header on board for LED connection
- RAID 5 (Distributed Parity RAID) has Highest Read data transaction rate and Good aggregate transfer rate
- JBOD is a virtual disk that combines all disk drives as one entire disk drive
- Provides RAID 0 (Stripping) to greatly increase the performance of data transfer by simultaneously writing data to multiple drives
- Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives
- RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring
- Completely with drivers for Windows 2000 ,XP, Vista, Win7 and 2003 Server
- Supports 64bit / 32bit Windows Vista, Win7
- Supports Mac OS X v10.4. See SiliconImage SiI3124.
- Linux 32bit / 64bit drivers support for Fedora Core2, Fedora Core3, Fedora Core4, RHEL 3.0 Up2, RHEL 4.0, RHEL 4.0 Up1, SuSE 9.0 SP1 RC5, SuSE Pro 9.3. (See SiliconImage SiI3124)
- Fully RoHS compliant
Raid5 SATA II – 3Gbps 4Ports (1External eSATA + 3 Internal) Low Profile PCI Host
Model: ST-125
