All products names and registered and unregistered trademarks mentioned are for identification purposes only and remain the exclusive property of their respective owners. Please see our disclaimer information.

Copyright © 1999 - 2024 Papyrus Computer Technologies Ltd. All rights reserved, Last updates of pages or web March 25, 2024 Best View Microsoft Edge, I.E 5.0 or later, Google Chrome, Mozilla Firefox 1024x768 Screen Mode

Connect Raspberry Pi USB to SATA device
Supports any type of SATA Device (SSD, DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk)
Supports SATA III, SATA II and SATA I drive
Compliant with Serial ATA Specification Revision 2.6
Supports Serial ATA transfer rate of 6.0 Gbps
Supports ATA/ATAPI Packet Command Set
Supports ATA/ATAPI LBA 48 Addressing mode
Compliant with Universal Serial Bus Specification Revision 2.0 (Data Rate 1.5/12/480 Mbps)
Compliant with Open Host Controller Interface Specification for USB Rev 1.0a
Compliant with Enhanced Host Controller Interface Specification for USB Rev 0.95
Both USB micro-B connector and USB 5 Pin Pin header on board for Pi connection
USB2.0 5Pin Pin Header Assignment: 5V, D-, D+, NC, GND
Includes Multi-Pi mounting accessory of standoff & nut & screw
Fully RoHS compliant
Note: Product supplies without Raspberry Pi B+