|
| |
|
|
 |
| |
P/N |
Product
Description |
|
 |
HX-411
|
2-Port Serial 1-Port Parallel PCI-Express Card
 |
1-Lane (x1) PCI-Express with transfer
rate 2.5Gb/s full duplex channel |
 |
2-Serial port with transfer rate up to
1.0Mbyte/s, 1-Parallel port with transfer rate up to 1.5Mbyte/s |
 |
Compatible with Standard 16C550 UART with
16-Byte Transmit-Receive FIFO |
 |
Support Plug and Play SPP, PS2, EPP, ECP
Compatible IEEE 1284 Printer Port |
 |
Supports Windows 95, 98, ME, 2000, NT
4.0, XP, Vista, Win7, Linux and DOS
|
|
|
 |
HX-427
|
3-Port
FireWire 800 1394b PCI-Express Card
 |
Chipset: TI
|
 |
2 external FireWire 800 1394b ports + 1
internal FireWire 800 1394b port |
 |
Fully supports provisions of IEEE
P1394b-2002 |
 |
Fully Compliant With Provisions of IEEE
Std 1394-1995 for a High-Performance Serial Bus and IEEE Std 1394a-2000 |
 |
Fully Compliant with 1394 Open Host
Controller Interface Specification. Revision 1.1 and Revision 1.2 draft |
 |
Supports serial bus data transfer rates
of 100, 200 ,400 and 800Mbps |
|
|
 |
HXSP-106
|
RS-232 to TTL
Converter
 |
Interface: Compatible with EIA / TIA of
the RS-232C and TTL standards. |
 |
Transmission speed: 0-115.2KBPS.
|
 |
Environment: -25 Celsius to 70
Celsius
, relative humidity 5% to 95%.
|
 |
connectors:RS-232 terminal (DB9
female) TTL side (DB9 male)
|
|
|
 |
KW-2103CFA
|
Compact
Flash to PCMCIA Adapter
 |
Supports and Converts Compact Flash
memory card to PCMCIA form factor |
 |
PCMCIA type II interface |
 |
Supports Windows and Mac |
|
|
 |
NW-100
|
1000/100/10 BASE-T Ethernet Low Profile
PCI Host Adapter
 |
Fully compliant with IEEE 802.3 (10Base-T Ethernet), IEEE
802.3u (100Base-TX Fast Ethernet), IEEE 802.3z (1000Base-T
Gigabit Ethernet) |
 |
4 LED's indicator for 10Link/Activity (red), 100Link/Activity (yellow),
1000Link/Activity (green) and Full Duplex (blue) |
 |
Low Profile Form Factor, Card supplied with 2 Brackets (Low Profile and regular
PCI Brackets) |
 |
Supports Full Duplex flow control (IEEE 802.3x) |
 |
Supports IEEE 802.1Q VLAN tagging |
 |
Jumbo Frame 7440 bytes |
 |
Supports 32bit /64bit Windows, Mac OS v9.x, v10.2, v10.3, v10.4, v10.5 |
|
|
 |
PE-114M
|
6Gbps eSATA3 2Ports Low Profile PCIe 2.0 Host Adapter for
Mac and Windows
 |
Non-Raid 6Gbps eSATA III external 2 Ports |
 |
Compliant with 5Gbps PCI Express 2.0 |
 |
Supports SATA III transfer rate of
6.0Gbps, 3.0Gbps, 1.5Gbps, Supports eSATA Hot-plug |
 |
Supports ATA and ATAPI commands and
Native Command Queuing (NCQ) |
 |
48 bits LBA can Break Capacity-Limit to
Support HDD larger than 137GB
|
 |
Low Profile PCI Form Factor, Includes an
additional Low Profile Bracket |
 |
Two Pin headers on board for LED
connection |
 |
64bit / 32bit OS In-box Driver
support non-booting Mac 10.5, 10.6, Linux |
 |
Completely with drivers for 64bit / 32bit
Windows 7, Vista, 2000, XP, 2003 and 2008 |
|
|
 |
PE-115
|
SATA III – 6Gbps
2Ports Low Profile PCIe 2.0 Host Adapter
 |
6Gbps
SATA III 2 Ports PCIe Gen2 1 Lane Host Adapter |
 |
Supports SATA III transfer rate of 6.0Gbps, 3.0Gbps, 1.5Gbps
|
 |
Support Hardware RAID0, RAID1 |
 |
Supports ATA and ATAPI commands, Supports Native Command Queuing (NCQ) |
 |
Supports 1 SATA Port Multiplier FIS-based or Command-based switching and
max 2 RAID groups |
 |
Low
Profile PCIe Form Factor, Includes Low Profile and regular size PCIe two
Brackets |
 |
Completely with drivers for 64bit / 32bit Windows 7, Vista, XP, 2003 and
2008 |
|
|
 |
SLPS065
|
Flexible PCI-E 4x
Riser Card Extender
 |
PCI-Express 4x Slots. |
 |
This riser card provides expansion for 1
slots with cable. |
 |
Fit for 1U / 2U rackmount chassis. |
 |
Gold plated contacts for best
conductivity and long life . |
 |
No Driver necessary and jump-less . |
 |
Flat Cable Length :150mm |
|
|
 |
SLPS068
|
Flexible PCI-E 8x
Riser Card Extender
 |
PCI-Express 8x Slots. |
 |
This riser card provides expansion for 1
slots with cable. |
 |
Fit for 1U / 2U rackmount chassis. |
 |
Gold plated contacts for best
conductivity and long life . |
 |
No Driver necessary and jump-less . |
 |
Flat Cable Length :150mm |
|
|
 |
ST-168M
|
mSATA SSD to 2.5”
SATA Drive Converter with 2.5” Metal Frame
 |
Convert mSATA SSD to 2.5” Form Factor |
 |
22 pin SATA (Signals and Power) male
connector on board |
 |
The mSATA SSD can be the primary bootable
device containing the OS and application.
|
 |
Includes 2.5 “ drive metal frame with 8
mounting holes |
 |
Transparent to the operating system and
does not require any drivers |
 |
Supports Windows, Mac and Linux OS |
|
|
 |
ST-168MF
|
mSATA SSD to 3.5”
SATA Drive Converter with 3.5” Metal Frame
 |
Convert mSATA SSD to 3.5” Form Factor |
 |
22 pin SATA (Signals and Power)
male connector on board |
 |
The mSATA SSD can be the primary bootable
device containing the OS and application.
|
 |
Includes 3.5 “ drive metal frame
with mounting holes |
 |
Transparent to the operating system and
does not require any drivers |
 |
Supports Windows, Mac and Linux OS |
|
|
 |
ST-187
|
Dual mini-SAS SFF-8088 to SFF-8087 Low
profile PCIe Host Adapter
 |
Support max SAS Host or SATA Host eight
Ports connection |
 |
Supports High Speed Transfer rate of
6Gbps |
 |
External Dual mini-SAS SFF-8088 26pin
connectors to dual internal SFF-8087 connectors |
 |
Fully compliant with SFF-8088 & SFF-8087
Specification |
 |
Low Profile PCIe Form Factor |
 |
Includes Low Profile and regular size
PCIe two Brackets |
|
|
 |
ST-187RM
|
Dual
mini-SAS SFF-8088 to SFF-8087 Adapter with SCSI-1 Frame
 |
Supports High Speed Transfer rate of
6Gbps |
 |
Supports SAS or SATA drives x8 |
 |
External Dual mini-SAS SFF-8088 26pin
sockets connection to dual SFF-8087 connectors |
 |
Fully compliant with SFF-8088 & SFF-8087
Specification |
 |
Bridge Board (L-type) SCSI-1 (Centronic
50pin) Metal frame and Mounting hole Includes screws |
|
|
 |
TD-109
|
RS-485/RS-422 Optical Isolation Repeater
 |
Connector: DB9 male with 6 terminal block
on RS-485/RS-422 side |
 |
Transmission medium: UTP-Unshielded
Twisted Pair or RS-485 Wire |
 |
Transmission distance: extend 1200m each
one. |
 |
Baud rate: 300~115000bps. |
 |
Surge Protection: 600W. ESD Protection:
15 KV. |
 |
Isolation Voltage: 2.5KV Instantaneous,
700V DC continuous |
|
|
 |
UB-114S
|
Internal USB 3.0 (NEC chipset) 2Ports Low Profile PCIe
Host Adapter
 |
PCIe Gen 2 x 1 Lane Host Adapter |
 |
Compliant with Universal Serial Bus 3.0
Specification Revision 1.0 |
 |
Two USB 3.0 Type A downstream connectors
on board, USB ports can handle Super Speed (5 Gbps), High Speed (480
Mbps), Full Speed (12 Mbps), and Low Speed (1.5 Mbps) transaction.
Support USB3.0, USB2.0 and USB1.1 devices |
 |
Low Profile PCI Form Factor, Includes an
additional Low Profile PCI Bracket |
 |
Built-in 15Pin SATA power connector for
Max 1.5A 5V bus power |
 |
64bit and 32bit Windows 7, Vista, XP
drivers support |
|
|
 |
UB-119
|
USB 3.0 1x Internal
+ 3x External 4Ports Low Profile PCIe Host Adapter
 |
1 Internal and 3 external USB 3.0 5Gbps Type A 2 Ports |
 |
PCIe Gen 2 x 1 Lane Host Adapter |
 |
Compliant with Universal Serial Bus 3.0
Specification Revision 1.0 |
 |
Two USB 3.0 Type A downstream connectors
on board, USB ports can handle Super Speed (5 Gbps), High Speed (480
Mbps), Full Speed (12 Mbps), and Low Speed (1.5 Mbps) transaction.
Support USB3.0, USB2.0 and USB1.1 devices |
 |
Low Profile PCI Form Factor, Includes an
additional Low Profile PCI Bracket |
 |
Built-in 15Pin SATA power connector for
Max 1.5A 5V bus power |
 |
64bit and 32bit Windows 7, Vista, XP
drivers support |
|
|
 |
UB-120TI
|
USB 3.0 External
4Ports PCIe Host Adapter
 |
4 External
USB 3.0 5Gbps Type A connectors |
 |
PCIe Gen 2 x 1 Lane Host Adapter |
 |
Compliant with Universal Serial Bus 3.0
Specification Revision 1.0 |
 |
Two USB 3.0 Type A downstream connectors
on board, USB ports can handle Super Speed (5 Gbps), High Speed (480
Mbps), Full Speed (12 Mbps), and Low Speed (1.5 Mbps) transaction.
Support USB3.0, USB2.0 and USB1.1 devices |
 |
Low Profile PCI Form Factor, Includes an
additional Low Profile PCI Bracket |
 |
Built-in 15Pin SATA power connector for
Max 1.5A 5V bus power |
 |
64bit and 32bit Windows 7, Vista, XP
drivers support |
|
|
 |
USB-COM+ |
1-Port RS-232 USB-to-Serial Adapter
 |
Adds one RS-232 serial port by connecting
to a USB port |
 |
Optional feature to supply power output
of DC 5V through PIN-9 of DB9 male to the serial devices requiring power |
 |
Optional feature to supply power output
of 5V, 200mA - upper case by sliding open for easy to supply DC 5V power |
 |
RS-232 data signals: TxD, RxD, RTS, CTS,
DSR, DTR, DCD, RI, GND |
 |
RS-232 data signals with DC 5V: TxD, RxD,
RTS, CTS, DSR, DTR, DCD, DC 5V, GND |
 |
High speed serial port with the baud rate
up to 921.6K bps |
 |
Serial port protected with surge
protection of 10KV |
 |
Powered by USB port, no external power
adapter required |
 |
Supports Windows 7, Vista, 2003, XP, 2000
and Linux |
|
|
 |
USB-COMi+ |
1-Port RS-232/422/485 USB-to-Serial
Adapter, Easy Mode Setting by Hidden DIP Switch
 |
Adds one RS-232, RS-422 or RS-485 serial
port by connecting to a USB port |
 |
No need to open chassis to set operation
modes- upper case can be sliding open for easy RS-232, RS-422, RS-485
mode settings |
 |
Full RS-232 modem control signals and
hardware/software flow control |
 |
RS-232 data signals: TxD, RxD, RTS, CTS,
DSR, DTR, DCD, RI, GND |
 |
RS-422 data signals: TxD-, TxD+, RxD+,
RxD-, GND, RTS-, RTS+, CTS+, CTS- |
 |
RS-485 4-wire data signals: TxD-, TxD+,
RxD+, RxD- |
 |
RS-485 2-wire data signals: Data-, Data+ |
 |
Automatic transmit and receive control
for 2-wire RS-485 half-duplex mode |
 |
Built-in termination and biasing |
 |
High speed serial port with baud rates up
to 921.6K bps |
 |
Serial port protected with surge
protection of 10KV |
 |
Powered by USB port, no external power
adapter required |
 |
Supports Windows 7, Vista, 2003, XP, 2000
and Linux |
|
|
 |
USB-COMi+2 |
1-Port RS-422/485 USB-to-Serial Adapter, Easy
Mode Setting by Hidden DIP Switch
 |
Adds one RS-422 or RS-485 serial port by
connecting to a USB port |
 |
No need to open chassis to set operation
modes- upper case can be sliding open for easy RS-422, RS-485 mode
settings |
 |
RS-422 data signals: TxD-, TxD+, RxD+,
RxD-, GND, RTS-, RTS+, CTS+, CTS- |
 |
RS-485 4-wire data signals: TxD-, TxD+,
RxD+, RxD- |
 |
RS-485 2-wire data signals: Data-, Data+ |
 |
Automatic transmit and receive control
for 2-wire RS-485 half-duplex mode |
 |
High speed serial port with baud rates up
to 921.6K bps |
 |
Serial port protected with surge
protection of 10KV, Built-in termination and biasing |
 |
Powered by USB port, no external power
adapter required |
 |
Supports Windows 7, Vista, 2003, XP, 2000
and Linux |
|
|
 |
USB2-2COM-SI-M
|
2-Port RS-232
USB-to-Serial Adapter, with Optical-isolation and Surge Protection, Metal Case
 |
Adds two industrial RS-232 serial port
with optical isolation by connecting to a USB port |
 |
2000V DC optical isolation, 25KV ESD
surge protection |
 |
Installed as standard Windows COM port,
|
 |
SECC metal chassis with DIN rail bracket |
 |
Full RS-232 modem control signals and
hardware/software flow control |
 |
RS-232 data signals: TxD, RxD, RTS, CTS,
DSR, DTR, DCD, RI, GND |
 |
High speed serial port with the baud rate
up to 921.6K bps |
 |
Powered by USB port, no external power
adapter required |
 |
COM port number assigned can be changed
to any COM port number required |
 |
Supports Windows 7, Vista, 2003, XP, 2000
and Linux |
|
|
 |
USB2-4COM-M-CBL
|
4-Port RS-232 USB-to-Serial Adapter,
Compact Metal Case with Extension Cable, DIN rail
 |
Adds four industrial RS-232 serial ports
by connecting to a USB port |
 |
Compact size box can be mounted to DIN
rail conveniently |
 |
Extension cable fanning out to 4 DB9
serial ports |
 |
Installed as standard Windows COM port |
 |
SECC metal chassis with DIN rail bracket |
 |
RS-232 data signals: TxD, RxD, RTS, CTS,
DSR, DTR, DCD, RI, GND |
 |
High speed serial port with the baud rate
up to 921.6K bps |
 |
Powered by USB port, no external power
adapter required |
 |
COM port number assigned can be changed
to any COM port number required |
 |
Supports Windows 7, Vista, 2003, XP, 2000
and Linux |
|
|
 |
USB2-4COMi-M-CBL
|
4-Port
RS-232/422/485 USB-to-Serial Adapter, Compact Metal Case with Extension Cable,
DIN rail
 |
Adds four industrial RS-232, RS-422 or
RS-485 serial ports by connecting to a USB port
|
 |
Compact size box can be mounted to DIN
rail conveniently |
 |
Extension spider cable with DB37
connector to 4 DB9 serial ports |
 |
SECC metal chassis with DIN rail bracket |
 |
Automatic transmit and receive control
for 2-wire RS-485 half-duplex mode |
 |
Termination resistors and biasing
resistors built on board |
 |
Operation Modes: RS-232; Standard RS-232
Mode, RS-422; 4-wire with handshaking, RS-485; 4-wire full duplex,
RS-485; 2-wire half duplex with echo, RS-485; 2-wire half duplex without
echo |
 |
High speed serial port with baud rates up
to 921.6K bps |
 |
Serial port protected with surge
protection of 10KV |
 |
Powered by USB port, no external power
adapter required |
 |
Supports Windows 7, Vista, 2003, XP, 2000
and Linux |
|
|
 |
USB2-8COM-M-CBL |
8-Port RS-232 USB-to-Serial Adapter,
Compact Metal Case with Extension Cable, DIN rail
 |
Adds eight industrial RS-232 serial ports by connecting
to a USB port |
 |
Compact size box can be mounted to DIN rail conveniently |
 |
Octopus cable fanning out to 8 DB9 serial
ports |
 |
Installed as standard Windows COM port |
 |
SECC metal chassis with DIN rail bracket |
 |
Hardware/software flow control |
 |
RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD,
RI, GND |
 |
High speed serial port with the baud rate up to 921.6K
bps |
 |
Powered by USB port, no external power adapter required |
 |
COM port number assigned can be changed to any COM port
number required |
 |
Supports Windows 7, Vista, 2003, XP, 2000 and Linux |
|
|
 |
USB2-16COM-M-CBL |
16-Port RS-232 USB-to-Serial Adapter, Compact Metal Case
with two Octopus Cables, DIN rail
 |
Adds sixteen industrial RS-232 serial
ports by connecting to a USB port |
 |
Compact size box can be mounted to DIN
rail conveniently |
 |
Two octopus cable fanning out to 16 DB9
serial ports |
 |
SECC metal chassis with DIN rail bracket |
 |
Hardware/software flow control |
 |
RS-232 data signals: TxD, RxD, RTS, CTS,
DSR, DTR, DCD, GND |
 |
High speed serial port with the baud rate
up to 921.6K bps |
 |
Terminal power adapter of 12V, 1A
provided |
 |
COM port number assigned can be changed
to any COM port number required |
 |
Supports Windows 7, Vista, 2003, XP, 2000
and Linux |
|
|
Back to Top
|
|
|
| Israel,
IL, ישראל |
מוצרים חדשים |
|