All products names and registered and unregistered trademarks mentioned are for identification purposes only and remain the exclusive property of their respective owners. Please see our disclaimer information.
The VSCOM UPCI-800i PCI card is designed for RS232, RS422/485 industrial communication. It supports 8 independent RS232, RS422 or RS485 ports. Each port can be configured separate. Available modes : RS232, RS422 full duplex, RS485 full duplex (4 wire), RS485 half duplex (2 wire) with and without echo. In RS485 modes applications enable transmission by simply sending data. This is done by ART (Automatic Receive Transmit Control) intelligence. The Transmitter is disabled exactly with the end of the last character sent. No modification is necessary in programs. The common control by RTS is possible for compatibility.In addition, hardware flow control and built-in termination resistors guarantee data integrity. Surge protection is also available for RS232 Signals to deliver high reliability. All of these features make the uPCI-800I a suitable candidate for harsh industrial applications.
Universal PCI 3.3 / 5.0V
8x RS232, RS422/485
RS485 ART (Automatic Receive Transmit control)
RS485 in 6 operation modes
Compact board size (half-size)
Hardware flow control
Built-in termination resistors
I/O controller: 8x 16C550C or compatible, each with 16 bytes Tx/Rx FIFO
Connector type: 1x DB78 female, Cable 8 x DB9 male
Bus interface: PCI version 2.1 (32bit) Universal PCI 3.3V / 5.0V