All products names and registered and unregistered trademarks mentioned are for identification purposes only and remain the exclusive property of their respective owners. Please see our disclaimer information.

Copyright © 1999 - 2020 Papyrus Computer Technologies Ltd. All rights reserved, Last updates of pages or web October 29, 2017  Best View Microsoft I.E 5.0 or later, Google Chrome, Mozilla Firefox, Edge 1024x768 Screen Mode

Papyrus Computer Technologies Ltd.

English / Hebrew

The TITAN uPCI-200L, uPCI-200LP and uPCI-200LS Universal PCI serial I/O cards offers two independent RS-232 serial ports. This I/O board support both 3.3V and 5V PCI bus, and it’s compatible with 32-bit PCI, 64-bit PCI and PCI-X bus. All serial ports are built by 16550A-compatible UARTS with 16 byte FIFO.


The TITAN uPCI-200L,uPCI-200LP and uPCI-200LS Universal PCI serial I/O cards provide connectivity to RS-232 communication devices for factory automation equipment, multi-drop data collection devices, barcode readers, time clocks, scales, data entry terminals, PC to PC communications and serial communication in harsh environments.


The supplied drivers for Windows operating system install the serial ports into the Windows API, so they appear as the usual Com ports software requires. A rich set of driver options is configured via the Device Manager in Windows. The drivers allow to configure the serial ports for a bit-rate of up to 921,600 bps.


The uPCI-200L, uPCI-200LP and uPCI-200LS Universal PCI serial I/O card is an advanced and high efficient solution for serial data communication and industrial automation applications


Features


Specifications:



2-Port RS-232 UPCI to Serial Card


Model: UPCI-200LP, UPCI-200LS

2-Port RS-232 UPCI to Serial Card

General

Bus

Universal PCI (5V and 3.3V) 32 bit 33MHz

Chipset

TITAN BSP9216B ×1

Interface

RS-232

Plug & Play

Supported

IRQ & IO Address

Assigned by system BIOS

Mechanical

uPCI-200LS with standard bracket

uPCI-200LP with low profile bracket for slim case

Serial Port

No. of Ports

Two

Connectors & Cables

Two DB9 male connector on card

RS-232 Signals

DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI

Max. Bitrates

921.6kbps

Serial Configuration

Data bits: 5, 6, 7, 8

Parity: None, Odd, Even, Mark, Space

Stop bits: 1, 1.5, 2

UART FIFO Buffer Size

Each port with 16 bytes FIFO for transmit & receive

Environment

Operating Temperature

0°C to 60°C

Storage Temperature

-40°C to 85°C

Humidity

0 to 80% RH. Noncondensing

Safety Approvals

CE, FCC